Yamaha DXL1K 1100W 12-Inch Powered Speaker System

Description: Yamaha DXL1K 1100W 12-Inch Powered Speaker System Yamaha DXL1K 1100W 12-Inch Powered Speaker System Despite its lightweight and compact cabinet construction, the DXL1K features a high-output 1100 W amplifier powering a high-frequency array speaker system with 10 x 1.5” drivers and a large 12” subwoofer, producing best-in-class sound pressure levels of up to 125 dB SPL. Offering an impressive 170 Degrees horizontal and 30 Degrees vertical coverage, the DXL1K delivers clear, high-quality sound consistently throughout a wide area. The DXL1K is an innovative column-style powered speaker system that is capable of filling a wide area with high-quality and uniform sound, lightweight enough to be easily carried by anyone, simple enough to set up in about one minute, and durable enough to wIt’stand harsh environments. J-Curve Slim Line Array The high-frequency speaker array is comprised of 10 small-diameter 1.5” speakers. By adopting a J-curve array configuration, the high-frequency unit achieves vertical coverage of 30 Degrees across a span of 170 Degrees. With such a long, 10-driver array design the DXL1K can deliver clear, high-quality sound consistently over longer distances, projecting uniform, high-quality sound from the front to the rear of the audience. Simple setup Simply place the 2 spacers and speaker unit into the subwoofer and setup is essentially done, with no cables, speaker stand, or additional gear required beyond the main unit. All you need is in the package. Class-leading 12-inch “compact” subwoofer The subwoofer features a 12-inch speaker unit which is hardly “compact,” and actually, the largest in its class. Despite housing a 12-inch speaker unit that is the largest in its class, the DXL1K boasts the smallest cabinet on the market for a subwoofer of this size and power. By incorporating Yamaha’s own Twisted Flare Port technology to reduce port wind noise that can occur with compact bass-reflex subwoofers, the low-end output is maximized, producing very deep, powerful, distortion-free bass. Expandable STAGEPAS systems Linking a DXL1K and STAGEPAS 1K mkII provides greater coverage area and increased output power for large-scale performances. Both stereo and mono playback are supported, and when the STAGEPAS 1K mkII is set to mono, the inputs of the DXL1K and STAGEPAS 1K mkII can still be used (up to five mono inputs plus one stereo input). High efficiency “1100” W Class-D amplifier Also, at the top of its class for output power, the 1100W Class-D amplifier module is capable of delivering an impressive 125 dB SPL from the deceptively compact speaker cabinet. And just as importantly, we’ve leveraged Yamaha’s decades-long experience as a manufacturer of professional PA products, and innovator of related technologies to ensure that with great power comes great stability, and that the DXL1K maintains the same accurate, superior-quality sound even at high output. Fitted cover included The DXL1K comes with its own cover which, in addition to protecting the unit, has pouches for both spacers and speaker array as well as additional storage for accessories to further streamline system setup and teardown. High-grade polyurea coating The lightweight ABS cabinet of subwoofer features a high-grade polyurea coating to prevent wear and tear during transport. It is light enough to make the system extremely portable, but also rugged and scratch-resistant enough to wIt’stand harsh performance environments. Optional dolly (DL-SP1K) Not Included An optional dedicated dolly allows for more convenient transportation – particularly useful for performers transporting additional gear and instruments. Featuring a simple, sturdy mechanism that locks down the speaker cover the lightweight dolly enables smooth, reliable transportation. Technical Specifications System Type Powered subwoofer with a line array speaker Frequency Response (-10 dB) 37 Hz – 20 kHz Coverage Angle (Horizontal x Vertical) 170 Degrees x 30 Degrees Crossover Frequency 240 Hz Maximum Output Level (Measured peak, IEC noise@1 m) 125 dB SPL Power Requirements 100V 50Hz/60Hz, 110V-120V 60Hz, 220V-240V 50Hz/60Hz Power Consumption 25 W (Idle), 91 W (1/8 power) Dimensions (W x H x D) System (maximum) 334 x 2,000 x 418 mm / 13.2” x 78.7” x 16.5” Weight 23.0 kg (50.7 lbs) Control panel The number of Mixing Channels 2 Analog Inputs Mono mic/line x 1, mono line x 1 LINK IN (MONO) Effects MODE (SPEECH/MUSIC/CLUB) Outputs LINK OUT (MONO) Amplifier section Rated Output Dynamic 1,100 W Speaker section Enclosure Line array speaker: Enclosed Subwoofer: Bass-reflex type Speaker Unit Line array speaker: 1.5” (3.8 cm) Cone x 10 Subwoofer: 12” (30 cm) Cone Dimensions (W x H x D) Line array speaker: 67 x 582 x 86 mm / 2.6” x 22.9” x 3.4” Spacer (each): 67 x 555 x 86 mm / 2.6” x 21.9” x 3.4” Subwoofer: 334 x 550 x 418 mm / 13.2” x 21.7” x 16.5” Weight Line array speaker: 1.8 kg (4.0 lbs) Spacer (each): 0.6 kg (1.3 lbs) Subwoofer: 20.0 kg (44.1 lbs) Accessories Included in the package Power cord, Dedicated cover, Owner’s Manual Optional accessories DL-SP1K (dedicated dolly) Features and further details Contact us We can be contacted at any time through eBay messages if you have any questions, comments or product requests. We will respond to you within 24 hours and do our best to help you out! We encourage our customers to contact us with any questions or concerns! We'd like to be sure you are completely satisfied with your purchase. NEW ITEMS return policy 1. If you are not satisfied with your product, you may return it within 30-day window upon receiving the product. 2. Returns on new items are subject to restocking fees anywhere from 10-50% at the discretion of the seller. All returns will be inspected for any missing or damaged packaging or accessories or any other devaluation of the product. 3. Return shipping costs for new items are the responsibility of the buyer 4. Shipping charges incurred during fulfillment of the orders be deducted from the refund. 5. Items returned because a buyer found a "better price" will be subject to a partial refund. 6. All new item returns must receive an RMA number prior to the return. 7. Return items must be repackaged properly in the same care you received. USED/OPEN BOX Items return policy ALL sales are final / NO RETURN Any Items above $1000 return policy 1. These items purchased are not eligible for return unless if they are damaged/defective. CANCELLATIONS New and used items are subject to a 5% processing fee if cancelled before delivery.

Price: 1199 USD

Location: Santa Fe Springs, California

End Time: 2024-08-22T19:17:44.000Z

Shipping Cost: 0 USD