Description: Industry Standard PumpThis is the highest output water methanol injection pump on the market. We use this pump on all forced induction applications making between 800-1300 wheel horsepower and pure methanol. You must use 1/2" inside diameter supply hose. This pump has female 3/8 NPT ports. Other pumps on the market have the push to connect fittings built-in to the pump. We do not sell that style pump for three reasons. 1. If the fitting fails and begins leaking. You can not remove and replace the fitting to correct the issue. You have to replace the pump head. 2. Having the push to connect fittings built into the pump is requires adapter fittings when connecting stainless steel braided hoses. While everything else may be AN fittings and stainless steel braided hoses. You still have two push to connect fittings in the system which are a liability to failing.3. 1/4" push to connect fittings built into the pump restricts the pumps output. Pumps supply line should be 3/8" inside diameter or larger. Features Include:Pressure adjustable from 100-300 PSI3/8 NPT female inlet & outlet portMotor turns 2200 RPM @ 12 volts 16.5 amp drawBuilt-in bypass valveBuilt-in thermal protectionBuilt-in anti reverse check valve Built-in heat sink on back of motorHeavy duty dual EPDM pump seals Pressure adjustable from 100-300 PSICan run dry up to 1 hour without damage100% methanol compatibleTested prior to shipping Made in the USAWeight 6.2 lbsFlow & Horsepower Ratings @ 13.5 Volts:1.7 gallons per minute open flowUse 12 gauge wire for power and ground190 liters per hour @ 190 PSI50 gallons per hour @ 190 PSI3150 cubic centimeters @ 180 PSISpecial Notes:Do not use with petroleum products (E85, E98, gasoline, diesel, etc) Does not include pump fittings. Pump fittings are available for sale separatelyPumps come preset at 200 PSI Expect 4-5 years of service if pump pressure is left at 200 PSI or belowRunning the pump over 250 PSI is not advised and will shorten pumps lifeAll tests were performed using a 6AN stainless steel braided hose on the inlet side of pumpUsing 1/4" outside diameter nylon on the inlet side of the pump will reduce pump performance and flow outputPump may be mounted vertical or horizontal Contents Include:Pump (1)Special Notes: Do not use with petroleum products (E85, E98, gasoline, diesel, etc) Expect 4-5 years of use before needing to be replacedDoes not include pump fittings. Pump fittings are available for sale separatelyPumps come preset at 220 PSIExpect 4-5 years of service if pump pressure is left at 220 PSI or belowRunning the pump over 250 PSI is not advised and will shorten pumps lifeAll tests were performed using a 6AN stainless steel braided hose on the inlet side of pumpUsing 1/4" outside diameter nylon on the inlet side of the pump will reduce pump performance and flow outputPump may be mounted vertical or horizontal
Price: 270 USD
Location: Oxnard, California
End Time: 2024-11-18T22:50:57.000Z
Shipping Cost: 0 USD
Product Images
Item Specifics
Return shipping will be paid by: Buyer
Returns Accepted: Returns Accepted
Item must be returned within: 30 Days
Refund will be given as: Money Back
Brand: PM
