Description: MODEL:5.5KW Nominal Capacity (KVA):11 Input Current(A):13.9 Output Current (A):13 Applicable Motor Output (KW):5.5 Applicable Motor Output (HP):7.5 Overall Dimension（MM）:194*97*153 Installation Dimension（MM）:184*85 Rated Parameters MODEL Nominal Capacity (KVA) Input Current (A) Output Current (A) Applicable Motor Output (KW) Applicable Motor Output (HP) Overall Dimension （MM） Installation Dimension （MM） 5.5KW 11 13.9 13 5.5 7.5 194*97*153 184*85 Specifications Functional Descriptions Specifications INPUT Input Voltage AC,1PH,220V(-15%) ~ 240V(+10%) AC,3PH,380V(-15%) ~ 440V(+10%) ated Frequency 50/60 Hz Frequency Range ± 5% (47.5 ~ 63Hz) OUTPUT Output Voltage 0- Input Voltage Maximum Output Frequency 0.1 ~ 500HZ Output Power Please refer to Rated Parameter table Output Current Please refer to Rated Parameter table BASIC PARAMETERS Highest frequency Vector control: 0～500Hz V/F control：0～500Hz Carrier frequency 0.8KHz~8KHz(Support up to 16KHz carrier frequency) Adjusted automatically according to the load characteristics Input frequency resolution Digital setting: 0.01Hz Analog setting: Highest frequency× 0.025% Control mode Open-loop vector control (SVC) V/F control Starting torque 0.5Hz/150% (SVC) Adjustable speed ratio 1：100 (SVC) Speed control accuracy ± 0.5% (SVC) Overload capability 150% of rated current: 60 seconds 170% of rated current: 12 seconds 190% of rated current: 1.5 seconds Torque boost Auto torque boost; Range of manual torque boost 0.1%~30.0% V/F curve Three types: Linear, Multi-point, square curve (1.2 power, 1.4 power, 1.6 power, 1.8 power, 2 power) V/F separation Full separation, Half separation Acceleration and deceleration time Linear and S-curve acceleration and deceleration modes available. The range of acceleration and deceleration time is 0.0~6500.0s. DC braking DC braking frequency: 0.00Hz ~ Maximum frequency Braking time: 0.0s~36.0s Braking current value: 0.0%~100.0% JOG control JOG frequency range: 0.00Hz ~ Maximum frequency (5Hz in default). JOG acceleration and deceleration time: 0.0s~6500.0s. Built-in PID Simplify the establishment of a closed-loop control system Automatic voltage regulation (AVR) Keep the output voltage in stable when the grid voltage fluctuates. Stall prevention from overvoltage and overcurrent The current and voltage are limited automatically during operation to prevent frequent tripping due to over-current and over-voltage. Rapid current limit Reduce the risk of over-current faults to keep VFD operated normally. Torque limit and control Limit the torque automatically during operation to prevent frequent tripping due to over-current. Braking unit Built-in braking unit for 18.5KW and below models SPECIAL FEATURES Deceleration to stop In case of power loss, the energy from load feedback is used to compensate and decelerate the motor until standstill, to prevent mechanical damage. Rapid current limit Reduce the risk of over-current faults to keep VFD operated normally. Timer control Setting range: 0.0Min ~ 6500.0Min Communication Modbus INPUT & OUTPUT Command source Operation panel, control terminal and serial communication port. Frequency source Digital setting, Analog voltage setting, Analog current setting, Pulse setting and Serial port setting. Auxiliary frequency source 5 options to provide flexible auxiliary frequency fine-tuning and frequency synthesis. Input terminals 4 digital input terminals, one of which supports high-frequency pulse input up to 50kHz Output terminals 1 analog input terminal supporting 0 ~ 10V voltage input or 0 ~ 20mA current input DISPLAY BUTTONS LED display Display parameters Key lock and function selection It allows users to partially or fully lock the keys or define operated range for partial keys to prevent misoperation Protective function Motor short-circuit detection at power-on, output phase loss protection, over-current protection, over-voltage protection, under-voltage protection, overheat protection, overload protection and etc. ENVIRONMENT Storage temperature -20°C ~ 60°C Operation temperature -10°C ~ 50°C (If temperarture is higher than 40°C, the output capacity will be derated 1% per 1°C increase) Storage humidity ＜90%RH Operation humidity ＜90%RH Noise Level 50dBA max. OTHERS EMC Standards: IEC 61800-3, C3 Safety Standards: IEC 61800-5-1 INTERACE Communication Port RS-485
Price: 134 USD
Location: Jiaxing，Zhejiang
End Time: 2024-09-19T03:48:47.000Z
Shipping Cost: 0 USD
Product Images
Item Specifics
Return shipping will be paid by: Buyer
All returns accepted: Returns Accepted
Item must be returned within: 30 Days
Refund will be given as: Money Back
Return policy details:
Brand: CNSWIPOWER
Input Voltage: 380V~410V
Country/Region of Manufacture: China
MPN: Does Not Apply
Number Of Phases: 3-Phase
Power Rating: 5.5kw
Rated Load: 7.5HP
