Upgrade Savox SH-0264MG metal gear Micro Servo w/ Mounts for Losi Mini-T 2.0 RC

Description: AJC Mods 3D Printed Extended Servo Mounts, Horn, and a Savox high torque servo for the Losi Mini-T 2.0. Complete bolt-on upgrade kit for your Mini that greatly improves the steering/handling and durability! Includes everything needed to get going - use stock mounting hardware to fasten. New for 2022 our Savox Horns are now Heavy Duty Clamping Style for extra strength and durability Assembly Instructions: The long screw is used in conjunction with the nut on the horn to squeeze the clasp tight once installed on the servo. Install this long screw and nut prior to install, but do not tighten yet. The tolerances on these parts are very tight so you may have to use a set of pliers to install the nut. The shorter screw is used to fasten the horn to the servo. Once the servo has been mechanically or digitally 90'd (making sure the horn stands as close to perpendicular to the servo body when in the neutral position), press-fit the horn in place, pressing all the way down, then secure it with the shorter screw. Tighten the clasp with the already installed long screw for a secure fit. You can re-use the ball that comes with the car stock and thread it into the lower hole of the servo horn. Install the mounts and then clip the stock steering wiper arm to the installed horn ball and fasten the servo mounts using the stock servo mount hardware. What's Included & Specifications:2x HD Servo Mounts1x HD Servo Horn (New Clamping version now with M2x6 screw, M2x8 screw, and M2 nut)1x New in package Savox Servo (may be a SH-0264mg, or a SH-0263MG depending on stock) Pro Tip: *Use the black horn provided, but if you use the stock horn: The original white horns that come with the micro servo does not have a hole large enough to accept the stock Losi ball stud, heat it with a lighter and start to thread it into the horn. This will melt the horn and make a perfect sized hole for the ball stud, be sure to take it out once the hole is made and dip in water to cool, if left in too long while hot the hole may warp

Price: 35.95 USD

Location: Acworth, Georgia

End Time: 2024-08-19T19:52:16.000Z

Shipping Cost: 3.95 USD