TrolMaster Hydro-X Grow Room Add-On Sensors Temperature C02 Par Water Content

Description: Trolmaster Hydro-X Sensor Add-Ons CO2 Sensor for Hydro-X only（MBS-S8）The optional CO2 Sensor (MBS-S8) measures the CO2 PPM within the growing area. Using the MBS-S8 allows the users to connect and control their supplemental CO2 system using the Hydro-X. *Used in combination with one or more DSC-1 CO2 device modules. "Sensors should remain dry and clean to prevent premature failure. Do not spray foreign substances or allow water / condensate on the sensors"1 x CO2 Sensor (MBS-S8)1 x 16ft RJ12 Cable1 x RJ12 T-Splitter 3-in-1 Sensor for Hydro-X only（MBS-TH）3-in-1 Temp/Humid/Light sensor for the Hydro-X system. Note: This is a replacement or spare part. The main controller comes with a sensor already. "Sensors should remain dry and clean to prevent premature failure. Do not spray foreign substances or allow water / condensate on the sensors"1 x 3-in-1 Temp/Humidity/Light Sensor1 x 16ft RJ12 Cable1 x RJ12 T-Splitter Water Detector 2（WD-2）The optional Water Detector WD-2 allows the user to detect water leaks or water on the floor of the facility. Simply place the water sensor at floor level (or wherever you want to watch out for water leaks). Up to 5 Water detectors can be connected to a single Hydro-x controller. If ANY of the sensor detects a water leak, the unit will send a user-alert to notify user of a water leak.1 x Water Detector1 x Touch Spot1 x RJ12 T-splitter1 x 16ft RJ12 Cable Full Spectrum Quantum Sensor （MBS-PAR）The Full Spectrum Quantum Sensor (MBS-PAR) provides accurate and cost-effective measurement of photosynthetically active radiation (PAR) from all light sources used to grow plants. The full-spectrum quantum sensor has a spectral range of 389 to 692 nm ± 5 nm. The improved spectral response increases the accuracy of LED measurements. Used in conjunction with the Hydro-X controller, the PPFD sensor will AUTOMATICALLY increase or decrease the output level of your supplemental lighting systems to continuously maintain the exact lighting level (in PPFD) that the user selects. 1 x Full Spectrum Quantum Sensor1 x 1/2” Post Clamp1 x 4ft RJ12 Cable1 x RJ12 T-Splitter2 x 1/2“ End CapTrolMaster Hydro-X 4-in-1 Temp/Humid/CO2/Light Sensor The MBS-PRO 4-in-1 sensor combines a precision air temperature, humidity, CO2 (PPM) sensor and photocell to create the perfect all-in-one environmental sensor. It is designed for Hydro-X Pro system only.Note: This is a replacement or spare part. The main pro controller comes with a sensor already.Assembled using a new water-resistant plastic injected enclosure, the MBS-PRO can be placed in multiple locations throughout the growing area to provide spot measurements from multiple sensors (Up to 50 sensors can be connected to the Hydro-X Pro) The sensors can then be used together (averaged) or separately in order to control a specific section of the grow area by assigning a sensor to a specific control device.The MBS-PRO features a built-in LCD display to show the current conditions of that sensor which provide the ease of onsite monitoring. It also features a new “push-lock” connection to make installation easy.MBS-PRO FeaturesPlug & PlayBuilt-in LCD for Onsite MonitoringPlease Note: The MBS-Pro requires the SPH-1 for supplemental power. Water Content Sensor（WCS-1）The WCS-1 water content sensor allows the user to monitor the % of water / nutrients within the growing medium. The moisture level / water content is displayed in real-time on the WCS module itself, the Aqua-x and the APP. That data is displayed on a graph (through the APP) and helps the user visualize the dry-down time, and to make adjustments to their irrigation timers / irrigation cycles. Up to 8 WCS-1 can be connected to a single Aqua-x. When multiple WCS-1 are connected to a single Aqua-X, the displayed value on the Aqua-x and APP will be the AVERAGE of all of the sensors. 3-in-1 Water Content Sensor（WCS-2）Monitoring your grow medium for proper water content % and EC is an important factor in high-yield growing applications. TrolMaster understands that today's method of "crop steering" involves more precise control of the amount of nutrient and the nutrient strength within the grow medium in order to achieve the best results. The WCS-2 Water Content Sensor provides the users with an accurate and simple way to monitor your grow medium. The WCS-2 consists of a multi-prong sensor assembly that is inserted into your grow medium. Once the WCS-2 is calibrated to your grow medium and your nutrients, you will get constant readings from the WCS-2 providing the actual water content within the grow medium, the temperature of the grow medium and also the EC within the grow medium. You can even select alarm "limits" for each variable being monitored by the WCS-2 to send remote notifications through the TrolMaster or TM+ apps.

Price: 49.5 USD

Location: Allen Park, Michigan

End Time: 2024-08-26T19:38:10.000Z

Shipping Cost: N/A USD