Timbren Front Rear Suspension Enhancement KIt for Silverado Sierra 2500 3500 HD

Description: $ImageURL1$Timbren Front Rear Suspension Enhancement KIt for Silverado Sierra 2500 3500 HDPART NUMBER: GMFK25D|GMRCK25DBRAND: TimbrenDESCRIPTIONTimbren SES Suspension Enhancement System SKU# GMFK25D - Front Kit Weight from a snowplow or heavy aftermarket accessories can cause dangerous front-end sag and sway. When heavy weight is distributed only onto the front two tires, it can create difficult handling conditions and risk damage to your front-end suspension from bottoming out. Our Timbren SES front kits level out your front-end load, making for a safe, controlled ride. How? Our Aeon® rubbers springs deliver a progressive spring rate. As load increases, our rubber springs push back harder, eliminating squat, sway, and roll to put you back in control of your vehicle. After installation, the rubber spring should be in contact with the front axle. What makes Timbren SES kits different from other suspension enhancement systems? Unlike air bags, our kits require zero post-installation maintenance. And unlike other systems, you can install and haul in under 30 minutes, right from your driveway. Key Features Reduces front-end sag and sway Comfortable ride, loaded or unloaded DIY installation Zero post-installation maintenance Specs Rated Capacity: 8000 lbs Overall kit height = 3.25” What's Included 4 x Rubber spacers 4 x Patented Aeon® SES suspensions (hollow rubber springs) All necessary hardware Silverado And Sierra 2500 And 3500 Timbren SES Suspension Enhancement System SKU# GMRCK25D - Rear Kit Unstable loads while towing and hauling don’t just make for an uncomfortable ride. Difficult handling, rear sag, and corner sway create dangerous driving conditions — for you, your passengers, and other vehicles. Whether you’re towing your RV across the country or hauling hay down the highway, our Timbren SES kits level your load, making for a safe, controlled ride so smooth, you might forget you’re towing altogether. How? Our Aeon® rubber springs deliver a progressive spring rate. As load increases, our rubber springs push back harder, eliminating squat, sway, and roll. After installation, there should be a ½” to 1 ½” gap between the rubber spring and vehicle’s frame — meaning you’ll enjoy a comfortable unloaded ride, too. What makes Timbren SES kits different from other suspension enhancement systems? Unlike air bags, our kits require zero post-installation maintenance. And unlike other systems, you can install and haul in under 30 minutes, right from your driveway. Key Features Reduces sag, sway, and roll when towing and hauling Comfortable ride, loaded or unloaded DIY installation Zero post-installation maintenance Specs Rated Capacity: 8600 lbs Overall kit height = 6.25” What's Included 2 x Patented Aeon® SES suspensions (hollow rubber springs ) 2 x Integrated rubber mounting spacers (assembled with the SES suspensions) All necessary hardware

Price: 538.72 USD

Location: Appleton, Wisconsin

End Time: 2024-12-21T21:45:57.000Z

Shipping Cost: 0 USD