Description: Electronic Throttle Body the usual parts Throttle position sensor Flange Butterfly valve Throttle control valve Accelerator pedal position sensor The mechanic will replace the throttle body on your car if: It can’t be cleaned properly. The throttle flap, throttle shaft, or the mechanical linkages to the throttle cable are damaged. The electronic throttle actuator is faulty. There is a damaged throttle body or TP sensor electrical connector. Additionally, it’d be a good idea to get your cars throttle and fuel delivery system inspected for: A faulty throttle position sensor Gas pedal sensor problems Intake manifold pressure sensor issues A clogged air filter A bad Mass Airflow sensor (MAF sensor) A failing fuel pump A malfunctioning fuel injector A defective fuel pressure regulator These parts can cause problems similar to bad throttle body symptoms. How is Throttle Body Replacement Done? You will need: screwdrivers, socket set, spanners, needle pointed pliers. Throttle Body Replacement 1. Refer to the service manual for identification and location of the throttle body. 2. Remove the air intake duct from the throttle body once it is located. 3. Check the throttle body as well as the assembly and ports. If there is wearing in the assembly it may also require replacement. 4. Pull out the cables from the throttle body. 5. Remove the hoses such as air or vacuum hoses from the throttle body. ? 6. Disconnect the throttle position sensor. 7. Remove the screws that are holding the throttle body in the assembly. 8. Remove the throttle body carefully after disconnecting everything. 9. Properly clean the assembly and port to remove any carbon build up. 10. Compare the old throttle body with the new one. 11. Install the throttle body in the port. 12. Fasten the bolts and screws to hold it in place. 13. Connect all the things that you previously removed. 14. After connecting everything start your engine and test for the new throttle body. 15. Perform the following check as a final test. Start the engine and take the car for a test drive. On your return, let the engine idle for about two minutes and listen for problems in the idle, ensuring that it is smooth. If it is not, then there may be additional problems throughout your engine. Fitment Car Application: for Chevrolet & GMC 2014-2021 for Chevrolet Silverado 1500 5.3L 2019 for ChevroletSilverado 1500 LD 5.3L 2015-2021 for Chevrolet Suburban 5.3L 2015-2021 for Chevrolet Tahoe 5.3L 2014-2021 for GMC Sierra 1500 5.3L 2019 for GMC Sierra 1500 Limited 5.3L 2015-2021 for GMC Yukon 5.3L 2015-2021 for GMC Yukon XL 5.3L
Price: 57.99 USD
Location: Hebron, Kentucky
End Time: 2024-12-27T14:51:09.000Z
Shipping Cost: 0 USD
Product Images
Item Specifics
Return shipping will be paid by: Seller
Returns Accepted: Returns Accepted
Item must be returned within: 30 Days
Return policy details:
Bore Diameter: 80mm
Housing Length (in): 7
Main Port Inside Diameter (in): 3-1/8
Housing Width (in): 5-5/8
Air Intake Port Maximum Diameter (in): 3-5/8
Throttle Plate Diameter (in): 3-1/8
Mount Hole Quantity: 4
Connector Quantity: 1
Terminal QTY: 6
Throttle Position Sensor Included: Yes
Fuel System Type: FI
Throttle Body Actuation Type: Electrical
Fitment Type: Direct Replacement
Items Included: One Complete Throttle Body w/Sensor
Packaging Type: Box
Brand: Gearzaar
Manufacturer Part Number: CB16785101S
Interchange Part Number: 12617792,12678224
Superseded Part Number: S20223,TB1297,ETB0066
Weight: 4 LB
Manufacturer Warranty: 5 Years
Mounting Hardware Included: No
UPC: Does not apply
Modified Item: No
Placement on Vehicle: Front
Non-Domestic Product: Yes
Custom Bundle: No
Type: Throttle Body
