Description: 5#CO 20#CI LOW PRESSURE SWITCH The Sealed Unit Parts Company, Inc. 5#CO 20#CI LOW PRESSURE SWITCH is a sealed unit packed in fiberglass and painted with epoxy paint. This product features automatic reset, open on pre, and factory set reset. The pressure range for this item is between 0 and 220 psi with max working pressure of 0 psi. The components are copper tubing, iron, brass valve spec: CO=0-8.43 PSIG; CI=0-13.7 PSIG; OPR = OPEN ON PREPRESSURE; SELVE = SELEC TABLE ZONES (17). This automatic reset low pressure control (LPC) is used to protect a residential gas water heater from potentially dangerous low-water conditions in the tank. When the water level in the tank falls below the cutout level, the 5#CO 20#CI LPC responds by opening up and allowing incoming gas to flow directly into the pilot burner assembly. It is designed for use by itself or with an anti-tampering cap when assembled to an AGA style threaded regulator body. The SLP0520 pressure switch assembly is a replacement for your leaking or worn out control. It is compatible with sealed units parts company, Inc. (Supco) # 5.0# CO 20# CI low pressure systems. This is an automatic reset type automatic relief valve (ARVR), which switches on and off automatically as needed to maintain the set pressure in your water heater tank. The Automatic Low Pressure Control Switch features a brass bonnet and is rated at 20# CO / 5# CI. It is designed to meet UL, CSA, and FM approvals and features a U-shaped handle for easy turning. Supported with an automatic reset, it meets OSHA requirements of an unlatched cover. The SLP0520 is a low pressure switch that will trip at 20#CO (0.5"C) or equivalent high level of combustibles. The SLP0520 will reset automatically at 15#CO (0.3"C). The SLP0520 has a case size of 1/2"(DN15) and the applied voltage should be within the range of 5-12VDC. This is a new Supco SLP0520 Low Pressure Control, Automatic Reset, OPEN ON PRESS. This low pressure switch can be used on most 20# CO 2 cylinder valves. It's ideal for controlling secondary regulators on CO 2 tanks. The Supco Low Pressure Switch is used for automatically turning off a burner when the heat source reaches a preset low pressure. The switch can be used with tubing or pipe work, liquid propane gas, and natural gas. The auto reset feature ensures that the same component will not turn off and on repeatedly if the fault condition persists.
Price: 34.74 USD
Location: Morton Grove, Illinois
End Time: 2025-01-04T20:28:10.000Z
Shipping Cost: 0 USD
Product Images
Item Specifics
Return shipping will be paid by: Buyer
Returns Accepted: Returns Accepted
Item must be returned within: 30 Days
Refund will be given as: Money Back
Return policy details:
Brand: Supco
MPN: SLP0520
