Star Trek Metal Communicator Bezel Ring, Alpha Two Part Set

Description: In general: all parts are shipped with the machine finish as shown in the LISTING PHOTOS. Final finishing is by the Buyer (prop maker) and may include whatever; polishing, graining, distressing, acid washes, electroplating, and other treatments as selected and executed by the Buyer. Most parts will have some cosmetic blemishes that the Buyer may/may-not want to remove or enhance. Thank You. STAR TREK TOS, Communicator & Tricorder Alpha Bezel Set This Alpha Bezel Set was replicated after a close up in depth examination of the TOS Alpha Communicator shown on the HeroComm website. Dimensional comparisons were also made to many popular kits and reproductions. A great Marco Enterprises Tricorder Upgrade. See listing images for dimensional information. Installation views for reference only, this sale includes ONLY ONE BEZEL SET! Multiple SETS ships at ONE shipping charge. Super accurate machined aluminum part. For more images and details of the Alpha Communicator AND Tricorders, please visit the HeroComm Org informational website. This bezel set is a re-perfect replica of the Set Used prop part. The intent was to make the part work for just about every application while remaining true to the Alpha Hero. Thirty DAY returns are always OK, we want you to be happy!. No returns however after any cutting, fitting, or drilling. Made to surpass general the requirements of DIN ISO 2768-M fabrication tolerances. Very high quality, smooth and, both parts fit perfectly together. Thirty DAY returns are always OK, we want you to be happy! CLICK-LINK TO PAPER MOIRE CLICK LINK TO CLEAR TRANSPARENCY MOIRE CLICK FOR MOIRE VIDEO Visit the store by clicking below or in the upper right of this screen where it says "VISIT STORE" in the seller information box. CLICK FOR ALUMINUM T-JET KNOB & SCREW SETS MORE SUGGESTION ON HOW TO DO THE SPINNERS: FYI the Tricorder Moire used on the TV show never spun (JUST THE COMMUNICATORS DID). It is suggested to put a sheet of Dura-Lar distributed by Grafix (as in the next paragraph) in-between the lower paper spinner and fixed upper fixed-clear pattern if you do a motion version. Material Note: While the real Set-Used transparency is 0.020 inches thick - and OTHER replica Moire rings are now made for this specific thickness, my JUMP-LINK listed transparency is 0.005 inches thick If you need to add the extra .015 inches, we recommend an inexpensive durable clear material called Dura-Lar distributed by Grafix available on eBay in an 18 inch x 24 inch size. Use the Duralar as a floating spacer between the spinning transparencies/paper and transparency. YOU ARE THE PROP BUILDER AND MAKE ALL DECISIONS. For all applications: The underside of the bottom layer can also be made from a transparency print instead of the JUMP-LINK suggested Paper Moires. If using two transparencies for a full Hero look, the bottom transparency will need to be colored a warm white to simulate the Kromekote cardboard (the actual cardboard type used on the Set-Props). Several methods can be employed; but we have found spray-painting to be extremely effective. What works with great success is Rust-Oleum Gloss White Enamel. Once completely dry, it adheres to the plastic as if part of the material, resisting even scraping with a fingernail. Krylon Fusion For Plastics spray paint does just as well. Painting the surface that has the texture and printing on it will create the absolute sharpest image. Not able to control changes to Krylon Paint Formulas. Kromekote's cardboard white is warm white, and we have found the white-painted film has nearly the same cream-like hue. Gluing to the painted side a piece of white cardstock (using an art spray-mount or photo glue stick) completes the item. All products mentioned here are designed to endure years without discoloration. CONCERNING ALL METAL PARTS:Wash parts in detergent such as Dawn Dish-washing liquid and towel dry before installing. There is a non-visible thin film of oil on every metal part and failure to wash the parts may cause problems with glue bonding and any finishes, like paint or clear lacquer, that may be applied. Some Star Trek Prop History For Inquiring Minds: Most of these Prop Makers and Technicians have passed-on.Below are old-timer accounts of convention conversations before conventions were really a fad. (all these are therefore 2nd hand stories) Mr. Greg Jein was a very well known Star Trek TOS prop collector and authority (born October 31, 1945 in Los Angeles, USA; died May 22, 2022 in Los Angeles). He had personal friendships with all the listed Star Trek TOS production prop craftsmen (Bob Stone, James Rugg, Richard Heimer, John Dwyer, and Mr. Ruck). Greg was an acquaintance of mine (Jon-Paul L), and generously took the time to meet me in California on several occasions, beginning in 2018 right through 2021. He shall be missed.Mr. Jein was a filming model designer who, starting in the 1970s’, created miniatures for use in the special effects portions of many films and television series. Mr. Jein was nominated for an Academy Award for Best Visual Effects for “Close Encounters of the Third Kind” (1977) and, nominated for an Outstanding Special Visual Effects Emmy for “Angels in America” (1979).In the 1970s’ Greg worked onTV productions such as “Wonder Woman”, and “The UFO Incident”. Jein then went on to work on Spielberg's film “1941”, where he and his team constructed a number of models including a twelve-foot model of the Ferris wheel that's dislodged from its mount and rolls down the pier and into the water. For their work on “1941” Jein, William A. Fraker and A. D. Flowers were again nominated for an Academy Award for Best Visual Effects.Then in the 1980’s Greg Jein was invited to work on “Star Trek: The Motion Picture” building planetary models for Spock's spacewalk scene and the interior of the V'Ger craft. Jein continued his association with Star Trek Films, building alien weapons for: “Star Trek V The Final Frontier”, Starfleet helmets for the assassination scene in “Star Trek VI The Undiscovered Country”. In 1986 for “Star Trek The Next Generation” Jein and a team at Industrial Light & Magic (ALM) built the original six-foot model of the USS Enterprise (NCC-1701-D), the Ferengi Marauder starship and, the Klingon Vor'cha.BACK TO STAR TREK TOS 1966 THRU 1969Mr. Bob Stone was Star Trek's machinist and made all the metal prop parts for all three seasons of the show. Parts were made to order for each episode as in those times (the 1960’s) as machining was done by hand and there was no advantage to making short runs (and no studio funding either). Each episode had a specific budget. Speaking of budgets, Bob relied on his Star Trek friend Robert Archer (VP of Budgeting for the show) in getting a little leeway on the $ so he could do the best possible job. According to Bob there was no magic drum of Phaser Nozzles and every job was a mad-dash to meet the filming deadlines.Because parts were made only to order, parts varied quite a bit. These variations can be seen in all the surviving examples of TOS hand props from Phaser to Communicators and Tricorders. Sometimes it was not that a new design was needed but rather that when one Wings it from a sketch, in a hurry using what is on-hand, you get an unintended-new-version of something (in the 1960’s the TV audience never could see that).Robert Archer and Bob Stone worked closely together so when the show was canceled suddenly in season three, Robert Archer ended up with a nice collection of hand props. Richard Heimer made the molds for hand props. He also did all the casting and forming. This included; Vacuum form bucks, Fiberglass molds and urethane molds. Again, according to him most work is done in the normal Hollywood maddening rush. He shared with his convention friends that there were many molds made from molds when the production schedule demanded this. He also shared that when the show ended he rescued the molds from being discarded by putting them in his garage. James Ruggs (b. 1919) was the director of special effects for the show. He handled and repaired many of the props on-set. When the show was canceled in season three he rescued many hand props and even some models from the scrap heap. Dick Ruben, Prop & Art Assistant on the show, got his Set-Used Klingon disruptor from James. Mr. Ruggs held on to his rather large Star Trek collection for many years. It is widely known that Greg Jein got his Holy-Grail Hero Phaser from James.In closing a nod to Mr. Ruck, a prop technician, who reported that he repaired some hand props hundreds of times as they were often damaged during filming. He had also shared that the fiberglass Mid-Grade’s, and some other props often used basswood strips between the seams to establish uniform dimensions. Watch some YouTube Star Trek TOS bloopers to see what he was talking about when it comes to repairs and hand props flying apart. The jonpaultrek2012™® company Supports the right to free expression and the value of the copyright. The purpose of the copyright is to encourage writers, filmmakers and artists to produce the creative works that enrich our culture. All scanning, uploading, and distribution of the content of this web posting without permission is theft of the author's Intellectual Property. if you would like permission to use the material from this website (Other than for the intended review purposes) Please contact me for permission. All new products sold on this website are produced under license From: jonpaultrek2012™® LLC, Florida corporation, located in the United States of America. INTERNATIONAL ORDER TRANSIT TIMES DEPENDS ENTIRELY ON: (a) THE LOCAL DESTINATION TRANSIT TIMES, AND (b) LOCAL DESTINATION CUSTOMS CLEARANCE TIME. THIS EBAY SELLER IS NOT RESPONSIBLE FOR YOUR LOCAL CARRIER AND LOCAL CUSTOMS OFFICE SLOW PROCESSING. TRACK ALL ORDERS THROUGH EBAY AND INQUIRE ON ALL DELAYS BY CONTACTING EBAY.

Price: 20.59 USD

Location: Brooksville, Florida

End Time: 2024-08-18T12:50:45.000Z

Shipping Cost: 5.99 USD