South Bend Lathe Heavy 10 - Rebuild Parts Kit (Model 10L & 10R)

Description: Rebuild Kit for South Bend Lathe Model 10L or 10R (Heavy 10) Made in USA by ILION Industrial Services, LLC - Heavy 10- If you are contemplating cleaning up that old South Bend sitting in your garage, this kit is what you will need to get the job done. For owners of the heavy 10 South Bends who need to disassemble and refurbish their machine, this aftermarket assortment of consumable gaskets, wicks, wipers and oil control felts will provide all that is required to help put your lathe back into its original condition when you go to reassemble it. These parts were designed to provide and retain adequate lubrication in critical parts of the lathe while at the same time acting as a trap for dirt, chips and sludge. They should be replaced at regular intervals as opposed to trying to clean and reuse the old ones. The capillary oil wicks we provide for the headstock are made from the highest grade tempered spring steel, CNC wound and stress relieved to provide long service life. The lower wicking material is long-strand virgin wool and the cap wick is high quality hard grey felt so you will not find a better quality replacement wick anywhere. The remaining apron wicks, gearbox wicks, wipers, and oil control plugs are all hard white felt, precision die cut for a consistent close fit on most all versions of the Southbend 10L lathe that were produced in large quantities from the late 1930's through the 1980’s. Parts are included that will fit the older single tumber quick change gearbox and the newer double tumbler gearbox. Now you don’t have to buy a whole yard of felt to get what you need and then waste time trying to cut and custom fit the individual parts to your lathe. We’ve done all of the work for you. These kits are very reasonably priced compared to OEM or used parts so don’t miss out on a chance to pick up a complete kit for your lathe while they last. This kit is for the 10L or 10R only so if you have a 10k or "light 10" workshop lathe, please see our other auctions for those kits. Email us if you have other questions, Thanks! Included In The "Heavy 10" Kit 2 Precision Spring Loaded Capillary oil wicks 2.125" long, .40" diameter. 2 Die cut bed wipers for the tailstock Die cut hard felt "donut" oil wick for the tailstock quill screw Die cut rubber bumper washer for the tailstock quill screw Die Cut Apron Clutch Gasket Apron Oil Trough Wicks 4 Die Cut Way Wipers for the Saddle. Round felt wick for the Reversing Gears Various rectangual felts for shaft lubrication. Complete set of Felts for the Quick Change Gear Box (Shafts, Bosses, and Oil Passages) Transaction Information Free Shipping by USPS First Class Mail to any US address. If you have any questions, please don’t hesitate to contact me. I will be happy to answer any questions. Thanks for your consideration. Disclaimer: ILION Industrial Services, LLC is neither affiliated with South Bend Lathe, Inc nor successor companies and makes no claims as such. Any information or product offered through this manual is done so in good faith in order to assist vintage machinery owners and is not sanctioned by South Bend Lathe, Inc. as OEM information, parts or products. ILION Industrial Services, LLC makes no warranty and accepts no liability for injury, property damage or any other costs incurred and/or damages suffered (including direct, indirect or consequential damage or damages, as well as loss of income or profits) as a result of the use of any information or product contained or referenced herein. By the purchase and/or use of the information or products referenced in this document, the user expressly accepts these terms and conditions.

Price: 64.95 USD

Location: Durham, North Carolina

End Time: 2023-09-13T03:08:09.000Z

Shipping Cost: 0 USD