Smartipi Touch 2 - Case for the Official Raspberry Pi 7" Touchscreen Display ...

Description: Includes a cooling fanWorks with Official 7" Raspberry Pi display and Raspberry Pi 3,4 or 5Works with Raspberry Pi HAT boardsThree faceplate options includedMounting point for Raspberry Pi official camera V1,V2 or V3. Not compatible with HQ camera. Product Description Works with the official Raspberry Pi 7" touchscreen display The SmartiPi Touch 2 is a case for the Official Raspberry Pi display and Raspberry Pi 3,4 or 5. It also has a spot for the Official Raspberry Pi camera v1,v2, or v3. Not compatible with Raspberry Pi HQ camera. Requires a 5v 2A micro USB power supply if using a Raspberry Pi 3. Requires a 5v 3A USB-C power supply if using a Raspberry Pi 4 or 5. Raspberry Pi display, Raspberry Pi camera, and Raspberry Pi not included. Please note: Raspberry Pi must be removed to access microSD card. Key features Raspberry Pi camera integration Mount the Official Raspberry Pi camera V1, V2 or V3 behind the front face plate. Not compatible with the Raspberry Pi HQ camera. Cooling fan included A cooling fan is included to keep your Raspberry Pi cool. The cooling fan connects to the Raspberry Pi GPIO. Two speed options are available. Works with HAT boards HAT boards can be attached to the Raspberry PI GPIO pins and secured to the case using the included hardware. All ports are accessible All ports of the Raspberry Pi are accessible, including the HDMI. Compatible with the Official Raspberry Pi 7" display The case is compatible with the Official Raspberry Pi 7" display and Official Raspberry Pi camera V1, V2 or V3. The camera and display are not included. Not compatible with the Raspberry Pi HQ camera. The Raspberry Pi is mounted in a back compartment The Raspberry Pi is mounted under a door in a back compartment. The included white ribbon cables connect to the display and Raspberry Pi camera. Works with Raspberry Pi 3,4 or 5. Works with the Official Raspberry Pi camera V1,V2 or V3. Not compatible with the Raspberry Pi HQ camera. Camera mount The Official Raspberry Pi camera V1,V2 or V3 is secured to the case with the included screws. Not compatible with the Raspberry Pi HQ camera. 75mm VESA mounting points Four M4 threaded mounting points on the back can be used to attach the case to a VESA mount holder. Small mounting feet included Small mounting feet are included and can used instead of the stand to mount the case to any surface that you would like. Splitter cable for the Raspberry Pi 3,4 and 5 A splitter cable to power the Raspberry Pi display and Raspberry Pi 3,4 and 5 is included. Adjustable angle The case angle can be adjusted by pivoting it backward or forward. This is an essential feature to improve usability. Three front faceplate options are included A building block compatible faceplate with camera hole, a plain faceplate with camera hole, and plain faceplate without camera hole are included. They can be changed with the supplied screws. REVISED ON 11/11/2024

Price: 46.95 USD

Location: New York, New York

End Time: 2024-12-03T09:32:59.000Z

Shipping Cost: 0 USD