SmallRig Sony VCT-14 Quick Release Tripod Plate+Shoulder Plate+15mm-Railblock

Description: 🛒Brand Outlet📷Shop by Camerafor Sonyfor Nikonfor Canonfor FUJIFILMfor Panasonic📸AccessoriesMounting BracketHandleHDMI Cable&Clamp🎥Camera Tripod🔋Power Solution📹Stabilizer Accessories💪Shoulder Rig💡Light📱Phone AccessoriesPackage includes: 1、VCT-14 Quick Release Tripod Plate 2169：https://www.ebay.com/itm/293829305065 2、Shoulder Pad Pro 2837B：https://www.ebay.com/itm/294740323742 3、Super Lightweight 15mm-Railblock 2061：https://www.ebay.com/itm/293859145661 About this item-VCT-14 Quick Release Tripod Plate 2169 【For Tripod Shooting】The tripod adapter plate with V-wedge front is for Sony VCT-14 standard, you can use with standard VCT-14 shoulder plate, such as SMALLRIG Shoulder Plate for Sony VCT-14 - 2837【Safety Locking System】There is no slack and the camcorder is locked solidly to the baseplate since a spring-loaded rear pin is equipped to provide resistance when you’re pulling the camera on and off and prevent from potential sliding off【Quick Release Install】Features a safety release lever on the side for quick release, and it’s completely hands-free to lock into place【Extra Mounting Holes】Comes with plenty of 1/4"-20 and 3/8"-16 threaded holes on the bottom for adapting different quick release plate【Full-metal Construction】All-metal construction is extremely solid, which reduces the potential risk of breaking. Meanwhile, the smooth coating allows sliding inside easilySmallRig VCT-14 Quick Release Tripod PlateAbout the Product:Tripod Plate 2169 is for Sony VCT-14 standard which enables you to quick attach and remove your camcorder from a tripod adapter by using the lever release.Key Features：Industry-Standard VCT-14 QRStandard Release LeverAll-Metal Construction MULTIPLE 1/4"-20 AND 3/8"-16 THREADSMAIN FEATURES OF NATO HANDLE Quick Release LeverIt enables you to quickly and easily attach and remove your camera quipped with a VCT-14 plate.The VCT-14 plate or mounting system is an industry standard, providing a secure mounting platform that is quick to release while preventing the twisting of the camera on the plate.Co-designWe believe that users are the best designers, so we are always collecting suggestions and feedback from professional videographers, filmmakers and photography enthusiasts all over the world. We sincerely invite you to co-design with us. SPECIFICATIONAbout this item-Shoulder Pad Pro 2837B 【Quick Release Design】SmallRig Shoulder Pad Pro 2837 is designed for SONY VCT-14 quick release baseplate, which fits the camera through a quick release plate for Manfrotto 501. Users can realize a rapid switch between shoulder shooting and tripod shooting through the shoulder pad.【15mm LWS rod adapter】The front and rear ends of the dual rod system have a standard diameter of 15mm and a spacing of 60mm. Moreover, the front-end dual rod system can save 24mm for up-regulating, which can guarantee the spacing between the lens center of FX9, FS5, for URSA MINI, for CANON C300, and other devices to be 85mm as the standard.【M6 Rosette】Both sides of the shoulder pad are standard M6 rosette mount, which can be installed with the original control handle of 1810 or FX9 machines.【Center Gravity Adjustable】This item can be adjusted forward about 80mm through the built-in quick release plate in order to facilitate users to adjust the equipment’s center gravity and install the following focus and matte box; the front two tubes can be adjusted together with the quick release plate, so there is no need to remove the equipment such as follow focus and matte box.【Extra Mounting Points】The right side of 2837 is reserved with a 1/4 "-20 threaded hole, which can be used for installing magic arm and other products. The shoulder pad adopts the new silicone shoulder pad, which conforms to the shape of human shoulders and is soft and comfortable. In addition, the 2837 built-in flat wrench can be used on-demand.Note: This product is not for Zacuto VCT-14 plate and VCT-U14 plate.Shoulder Pad for VCT-14 PlateDesigned for SONY VCT-14 quick release baseplate and can realize the quick switch between shoulder and tripod shooting modesPlease Note: This product is NOT for Zacuto VCT-14 plate and VCT-U14 plate.Vertically Adjustable Rod ClampThe rod adapter is vertically adjustable by 23mm to fit different types of cameras, like FS7/FS7II/FS5/Ursa Mini/Canon C100.About this item-Super Lightweight 15mm-Railblock 2061 【Highly Customized Rod Clamp】SmallRig Super Lightweight 15 mm-Rail block 2061 comes with two rod clamps, which feature two 15mm rod holes to fix 15mm rods and can be mounted on a plate/cage via included screws for extension needs.【Standard 14"-20 Threads】The 15mm rod clamp comes with standard 1/4"-20 holes on it and has a standard 9mm space between two holes.【Easy to Fix with 1/4" Screws】It provides two short 1/4" screws (8mm) and two long 1/4" screws (18mm) to help fix this rod clamp on cage/plate/handles then attach extra gears.【High-Quality Material】The rod clamp is made of high-quality aluminum alloy, light but stable when used. Spring Ratchet Wingnut is to tighten the rod and re-position in narrow spots where you’re not able to fully turn them.【Specifications】Package included: 2 x 15mm-railblock, 4 x 1/4'' screw(short), 4 x 1/4'' screw(long), 1 x Hex Spanner; Material: Aluminum.【Related Products】If you need 15mm aluminum alloy rods when supporting your equipment, go for "SmallRig 1053", "SmallRig 1049".Compatibility:15mm RodsPackage Includes:2 x 15mm-Railblock4 x 1/4'' Screw(short)4 x 1/4'' Screw(long)1 x Hex SpannerProduct Dimensions: 110 x 10 x 42 mmNet Weight: 80gPackage Size: 120 x 100 x 40mmMaterial(s): Aluminum AlloyFrom the BrandOn Aug 5, 2024 at 23:49:14 PDT, seller added the following information:

Price: 326.61 USD

Location: Rowland Heights, California

End Time: 2024-08-20T05:42:41.000Z

Shipping Cost: 0 USD