Simpson Strong-Tie Titen HD 1/4" x 3" Hex Head Concrete Anchor, 316ss (pk of 8)

Description: Simpson Strong-Tie THDC25300H6SS Titen HD 1/4 in. x 3 in.Type 316 Stainless-Steel Heavy-Duty Screw Anchor (8-Qty)For Stainless-Steel Screw Anchor for Concrete, Cider Block and Masonry Applications We researched fasteners to attach (2) 2x6 sides of a new deck frame to cinder block. These were the only fasteners we could find that were strong, corrosion resistant and could be easily removed if no longer necessary. Turns out they are easy to install too. Just drill a 1/4" hole, blow out the concrete dust and install with a socket wrench. Easy-peasy. Problem is the smallest order is a box of 50. We used 18 and are selling the rest of these amazing bolts in packages of 8 for about what we paid for them. Simpson Titen HD screw anchors are self undercutting, non-expansion screw anchors that are designed to be quickly and easily installed. All Titen HD screw anchors feature a patented thread design with serrated cutting teeth for easy installation. The high quality 316 stainless steel these are made out of makes them ideal for installation in areas where corrosion is a problem, such as exterior, salt water or where other corrosive chemicals may be present. Titen HD screw anchors are a trusted anchor solution because they offer the performance that specifiers need andthe ease of installation that contractors demand. Until now, however, they were not for use in permanent exterioror corrosive environments. The Titen HD stainless-steel screw anchor for concrete and masonry sets the newstandard for when the job calls for installation in multiple types of environments. It is the ultimate choice to provide fast and efficient installation, combined with long-lasting corrosion resistance for an unsurpassed peace-of-mind. Innovative — The serrated carbon-steel threads on the tip of the stainless-steel Titen HD are vital because theyundercut the concrete as the anchor is driven into the hole, making way for the rest of the threads to interlockwith the concrete. In order for these threads to be durable enough to cut into the concrete, they are formed fromcarbon steel that is then hardened and brazed onto the tip of the anchor. Corrosion Resistant — For any kind of exterior, coastal or chemical environment a steel anchor would be susceptible to corrosion. With the THDSS, there is finally a state-of-the-art anchor solution that combines the corrosion resistance of Type 316 stainless steel with the undercutting ability of sacrificial heat-treated carbon-steel cutting threads. Type 316 stainless steel is a nickel chromium austenitic grade of stainless steel with 2-3% molybdenum and is inherently non-magnetic. Fasteners made from Type 316 stainless steel are compliant with the 2006, 2009, and 2012 International Building Code, section 2304.9.5 and the International Residential Code 2006, Section R319.3 and 2009 and 2012, section R317.3. Type 316 stainless steel is not hardened by heat treatment and provides the highest level of corrosion protection available, especially in environments with chlorides.Level of Corrosion Resistance: High/Severe Features:• Ideal for exterior or corrosive environments.• Anchor contains minimal carbon steel resulting in less expansion forces in the concrete due to corrosion.• Installs with an impact wrench or with a hand tool.• Tested per ACI355.2, AC193 and AC106. Material: Type 316 stainless steel with carbon-steel lead threads Installation 1. Drill a hole in the base material using a carbide drill bit (complying with ANSI B212.15) with the same diameter as the nominal diameter of the anchor to be installed. Drill the hole to the specified minimum hole depth overdrill (see table below) to allow the thread tapping dust to settle, and blow it clean using compressed air. (Overhead installations need not be blown clean.) Alternatively, drill the hole deep enough to accommodate embedment depth and the dust from drilling and tapping.2. Insert the anchor through the fixture and into the hole.3. Tighten the anchor into the base material until the hex-washer head contacts the fixture. Titen HD Diameter (in.): 1/4Wrench Size (in.): 3/8Reommended Steel Fixture Hole Size (in.): 3/8 to 7/16Min. Hole Depth Overdrill (in.): 1/8 Suggested fixture hole sizes are for structural steel thicker than 12 gauge only. Larger holes are not required for wood or thinner cold-formed steel members. Caution-Holes in steel fixtures to be mounted should match the diameter specified in the table below if steel is thicker than 12 gauge.-Use a Titen HD screw anchor one time only — installing the anchor multiple times may result in excessive thread wear and reduce load capacity.-Do not use impact wrenches to install into hollow cinder blocks (CMUs).-Oversized holes in base material will reduce or eliminate the mechanical interlock of the threads with the base material and reduce the anchor’s load capacity.-Installation of concrete screw generally is influenced by many factors such as but not limited to, concrete compressive strength, type of aggregate, installation location, installation direction and tools used for installation.

Price: 34.5 USD

Location: Laguna Niguel, California

End Time: 2025-01-17T20:51:26.000Z

Shipping Cost: N/A USD