Remote Control Magnetic Sensor Alarm DIY Pair for Wood Door Glass Window Cabinet

Description: Features: 1. Easy and convenient to install. 2. Professional design, quick and sensitive response. 3. Immediately alarm while thieves pushing the door or window. 4. Suitable use at home, in office, in shop, etc. 5. One magnetic sensor can match with at most 8 remote controllers freely. 6. One remote controller could control several magnetic sensors. Magnetic Sensor: 1. Volume: 110dB 2. Color: White 3. Weight: 2.29oz / 65g 4. Material: ABS 5. Power Supply: 2 x AAA Batteries(not included) 6. Alarm Response Time: 200ms 7. Standby Time: 12 Months Remote Control: 1. Voltage: 12V 27A 2. Standby Current: 1uA 3. Working Current: 15mA 4. Standby Time: 12 Months 5. Remote Control Distance: 20m Wireless Indoor Magnetic Sensor Alarm Set This is a door magnet sensor alarm. Door Magnetic Alarm is separated to trigger the alarm with super loud volume. The alarm is triggered instantly without delay. This alarm has 3 modes: alarm mode, panic mode, and doorbell mode. The last two modes operate when the alarm is in disarm mode. When in alarm mode, the door magnet alarm will alarm for 30s after being triggered to alarm, and then stand still for 15s to detect the door magnet status, if it is still separated, it will alarm again for 30s, and so on and so forth, and the user can press the unlock button to stop the alarm sound. When the alarm is disarmed, you can press the ⚡ button to actively trigger the alarm for 30s, which is panic mode; if you press the doorbell button, the alarm will enter the doorbell mode. The door magnetic alarm will ring once separately, after closing the door and opening it again, the doorbell ringing will be triggered again. The volume of the alarm cannot be adjusted, 105db alarm sound volume. If you think it's too loud, you can seal the speaker with adhesive tape, it will reduce the volume of the alarm. The alarm is not waterproof! It does not apply to outdoor doorways! This applies to most doors, windows and chest of drawers indoors. About Pairing Pair the first remote Let the alarm power off for 2min (remove the battery). Long press 🔔 button of the remote control about 10s to trigger the alarm. When you hear the indicator tone of the alarm, the pairing is successful. Add another remote Long press 🔔 button of the PAIRED remote control to enter the pairing mode, press the 🔒 button of the NEW remote control, the pairing is successful. Delete all pairing of the remote Long press 🔔 button of the remote control to enter the pairing mode, press the ⚡ button of the remote control, the remote won't control. About the combination 1 Alarm can be paired with up to 8 remote control. 1 Remote Control can be paired with up to 35 Alarms. Warnning: Since it is a 433MHz wireless signal, it will be affected on metal surfaces. Parameter Shell Material PC Volume 105dB (Test distance is 30cm) Remote control distance 3~10m (9.8~32.8ft) Working frequency 433.92MHz Working temperature -20~60℃ Storage temperature -30℃ ~+70℃ Battery(Alarm) 2x AAA alkaline batteries Battery(Remote) 1x 12V/27A alkaline battery Installation Steps

Price: 12.49 USD

Location: South El Monte, California

End Time: 2025-01-22T16:44:17.000Z

Shipping Cost: 0 USD