Relay Module DC 5V/12V/24V Programmable Optocoupler Isolation Pulse Cycle

Description: 1. Newly upgraded, the module function increased to 32 kinds, to meet more application requirements2. Power supply anti-reversal function, will not be connected to the wrong power damage module3. Timing accuracy to 0.01 seconds timing. 0.1 seconds (minimum) ~999 minutes (maximum) selectable4. Low power consumption and power saving settings, can turn off the display area5. Can be applied to pump control, motor control, lamp control, solenoid valve control, etc. Multi-function relay control module, designed for users with a variety of different needs, using a micro-controller as the main control unit, preset 32 kinds of functions, users can use the corresponding specific functions according to actual needs. Product parameters:Trade name: multi-function delay relayRelay voltage number: DC5V/12V/24V optionalInput voltage: 5V version: DC5V power supply; 12V version: DC12V power supply; 24V version: DC24V power supplyOutput load: DC 30V, max. 10A. AC 250V, max. 5A. Trigger signal: 5V version (high level: 5V); 12V version (high level: 120), 24V version (high level: 24V) Both low level is 0VStatic current: 20mAOperating current: 60mAOperating temperature: -25°C to 85°CPower failure memory: Yes Warm tips1. Please select the required V number version (according to the above relay identification difference, relay for 5V instant 5V version) to avoid wrong purchase.2. Relay output for passive contacts, without current output, control a line on and off role3. Trigger voltage please strictly in accordance with the selected version of the input Instructions for use.Working parameters setting instructions:Press and hold the K1 key and do not let go, 2 seconds after the display shows P-xx, press K2 and K3 to change the working mode. After selecting the working mode, short press K1 key to enter the A time setting, the screen shows Axxx ,at this time, press K2 and K3 keys to modify the A time parameters, k2 and K3 keys short press plus or minus 1, long press fast plus or minus 10, press K4 key to set the position of the decimal point. After setting A time, then press K1 key for B time setting, the screen shows bxxx, at this time, press K2 and K3 keys to modify B time parameters, K2 and K3 keys short press plus or minus 1, long press fast plus or minus 10, press K4 key to set the position of the decimal point. After setting B time, (mode with c cycle times parameter) press K1 key again for c cycle times setting, the screen will display Cxxx, at this time, press K2 and K3 keys to modify c cycle times parameter, k2 and K3 keys short press plus or minus 1, long press fast plus or minus 10. After setting, press K1 key one last time to exit setting state and save all parameters. Explanation table of decimal point position and the time unit it represents: X.X.XX Decimal point is in the hundredth position, time range 0.01~9.99 secondsXX.X Decimal point in the tens place, time range 0.1~99.9 secondsXXX without decimal point, time range 1~999 secondsXXX. decimal point in single digit, time range 1~999 minutesClose the display: non-set state, press the K4 key to close the display, and then press that open again Working mode (32 kinds):P-11: Point-action mode, with signal suction, no signal disconnection.P-12: Self-locking mode, the relay status flips once after each trigger.P-13: After triggering, the relay will be activated and disconnected after delaying for A time; the trigger is invalid during the delay period.P-14: After triggering, the relay will be activated and disconnected after A time delay; the trigger will be retimed during the time delay.P-15: After triggering, the relay will be activated and disconnected after A time delay; the trigger will be retimed during the time delay.P-16: After triggering, the relay will be activated and disconnected after A time delay; trigger reset (relay disconnected) during the time delay.P-17: After triggering, the relay will be sucked during the signal duration, the input signal will disappear, and will be disconnected after A time delay; during the delay period, the relay will be triggered again to keep sucking, and the timing will stop until the last signal disappears, and will be disconnected after A time delay.P-18: Immediately after power is applied, the relay will be activated and disconnected after a delay of A seconds; until the next power is applied.P-21: Give a signal, delay A time and then the relay will close.P-22: Give a continuous signal, after A time delay, the relay will be activated; when the signal disappears, the relay will be disconnected.P-23: When the signal disappears for more than A time, the relay will be activated; when there is a signal, the relay will be disconnected.P-24: Give continuous signal, after A time, the relay will be opened; if the signal disappears after A time, the relay will be opened.P-25: Give a continuous signal, after A time, the relay will close; give a continuous signal again, after A time, the relay will openP-26: Give a signal, the relay will be closed after A time; after the signal disappears, the relay will be closed again after A seconds and stopP-27: With pulse signal (rising edge or falling edge), the relay breaks; without pulse signal, the relay sucks after A time delay (continuous high level or continuous low level are considered as no pulse).P-28: After power on, the relay will close after delaying A time until power off. P-31: After power on, the relay will suck A time and break B time, infinite cycle; stop after power off.P-32: With a continuous signal, the relay will suck A time and break B time, infinite cycle; when the signal disappears, the cycle will be terminated.P-33: With one signal, the relay will close A time and open B time, infinite cycle; with another signal, the cycle will be terminated.P-34: After power on, after delay A time, the relay will be sucked, and after sucking B time, it will be disconnected.P-35: After giving a signal and delaying A time, the relay will be sucked in, and after sucking B time, it will be disconnected.P-36: Give a continuous signal, after A time delay, the relay will close and open after B time; when the signal disappears, the timing will be cleared and the relay will open.P-37: With signal, the relay will be automatically disconnected after A time, and then timing B time after disconnection, the signal trigger is invalid in A+B time.P-38: With signal, the relay will be disconnected automatically after A time, and then timed B time after disconnection, and then disconnected automatically after A time again. P-41︰No action with signal; signal disappears to trigger; the relay sucks and disconnects after delaying A time.P-42︰Signal disappears, delay A time and then the relay will be sucked; then delay B time and then the relay will be disconnected.P-43: Signal disappears, relay will be activated after A time delay; relay will be disconnected after B time delay.P-44 : After power on, the relay will be sucked in for A time and disconnected for B time; after cycle c times, the relay will be disconnected and stopped.P-45 : When power is applied, the relay does not operate; when a signal is given, the relay is activated for A time and disconnected for B time; after c cycles, the relay is disconnected and stopped; when a signal is given, the relay is activated again.P-46 : After giving signal more than A times, the relay is sucking; keep sucking; disconnect and stop. Package list:Time-delay relay*1

Price: 5.99 USD

Location: Shen Zhen

End Time: 2024-11-12T23:14:03.000Z

Shipping Cost: 2.89 USD