Rear Disc Brake Conversion for 65-73 Ford Mustang using 94-04 Cobra Brakes LARGE

Description: Rear Disc Brake Conversion for LARGE bearing 65-73 Ford Mustang using 11.65" 94-04 Cobra Brakes LARGE For FORD 9" Large Bearing 65-73 Ford Mustang & Cougar Fits any car using the 9" FORD rear end with the 3.150" large bearings. They fit MOST but not all 15" wheels. Customer must verify fitment. This auction is for: Mounting Brackets (CAD Designed, Precision LASER CUT 0.375" thick steel)Mounting Hardware (Precision fit Grade 8 bolts and nuts)Detailed Installation InstructionsUSER SUPPLIED PARTS REQUIRED TO COMPLETE THIS INSTALLATION Rear Calipers from 94-2004 Cobra Mustang (COBRA are direct fit, GT or V6 require widening of the slot where they fit over the rotor) Rotors from 94-2004 Cobra Hoses from 77-80 Versailles or 94-98 Cobra Shorten rear hard lines Bolt or muffler clamp around axle for hose/hard line mount point E-brake cables from 94-2004 Mustang or from MustangSteveUse these brackets and bolts, then add your own pair of 94-2004 Cobra rear calipers and a pair of 11.65" 94-04 Cobra rear rotors and a pair of matching hoses to install rear disc brakes on your FORD. Complete instructions included. Requires 16" or 17" wheels, 17" preferred. Wheel must clear stock Cobra brake setup as these duplicate the dimensions exactly of a 94-04 Cobra. SOME 15" wheels will clear the COBRA REAR brakes, but fronts require 17".Don't want late model Ford factory wheels? This design lets you have the COBRA BRAKES and run many different aftermarket wheels, if they have the correct backspacing and will clear the caliper. NO WHEEL SPACER REQUIRED, at all! Of course, the late model 17x8 Mustang wheels will fit as well using a billet aluminum 1" spacer. (The deeper offset of the 94-04 Mustang wheel requires the spacer, NOT the brake setup)PURCHASER IS RESPONSIBLE FOR DETERMINING WHEEL FITMENT FOR YOUR VEHICLE!!!!!!!!!! The COBRA caliper is mounted in exactly the same position as the Ford Mustang Cobra caliper, avoiding rotating the caliper to a different position and causing possible air entrapment bleeding issues.Wheel bearing replacement is required when installing these conversion brackets. Uses 94-98 Mustang emergency brake cables (not included) easy to hook up. Cables available - ask.Fits three different bolt patterns that came on the 9" Ford big bearing rear ends.Versailles 9" has a rotated pattern on the axle tube flange. One set of holes for this rotated bolt pattern, using 1/2" boltsA 30 degree rotated set of holes for original big bearing style FORD rear ends using 1/2" bolts. This rotates the calipers up at an angle to give clearance for leaf spring rear ends.A different set of 30 degree rotated holes for big bearing rear ends using 3/8" holes. (New Style)CHECK OUT MY OTHER ITEMS if you need SMALL BEARING size. The small bearing version fits all original V8 65-73 Mustang 8" and 9" rear ends. See my other auctions or my Ebay Store for these items for early Mustangs & Small to Mid Size Fords: FRONT COBRA DISC BRAKE BRACKETS and FRONT & REAR 05-2014 Mustang CONVERSION DISC BRAKE BRACKETS The MustangSteve bracket has an integral machined bearing retainer so you don't have to go fabricate something else to hold the bearing in the axle. It replaces the axle bearing retainer flange with the new main bracket. Watch out for those cheap imitations! My parts are always complete so you don't get stuck with something that does not work. The difference in stopping power and fade resistance between these brakes and original Mustang drums or other factory disc brake conversions, or even the popular Versailles disc brake swap conversion is phenomenal !!! This retrofit kit, as with other MustangSteve products, uses easily replaceable and obtainable FORD parts for anything that could ever wear out. A BIG PLUS if you ever need a brake part in a hurry! Track width stays as stock FRONT COBRA BRACKETS ALSO AVAILABLE. See my other listings. TECH ADVICE AVAILABLE through eBay messaging system or through the FYIFORD internet forum that I manage. PICTURE shows rear discs on 68 Mustang 9" rear axle housing.

Price: 287 USD

Location: Cleburne, Texas

End Time: 2023-11-13T19:11:29.000Z

Shipping Cost: 9.99 USD