PVS69 Alpha Gen 4 Housing Digital with CS Lens Mounts NVG

Description: For sale is a complete hosing for a Gen 4 Alpha PVS-69 Digital CS Lens. This housing is the external battery housing. These tubes are designed to accept the MX69. The MX69 project is a mashup on an IR camera, voltage booster & display that is assembled in it's own contained housing, the MX69 body, then slide into the tube for final assembly. This unit is to be used with the CS Lens, adapters are included, although you can also just run the factory RunCam Night Eagle 3 lens. If that extra work does not interest you, a V760 series display adapter can be purchased in addition, but with half the front body for mounting the IR cameras. Components are printed in PLA+ with a high infill to ensure durability. No electronics, displays, shims, or IR cameras are included. Each set takes roughly 30 hours of printing so please keep that in mind when ordering. I usually ship a set in 2-3 days depending on the model. Feel free to ask any questions. The PVS69 is a open source project with the goal of making night vision obtainable by anyone. These electronic night vision googles utilize 2 IR cameras, rather than old school phosphor tube, and the imagine is displayed on an electronic display within the googles. Many different IR cameras & displays are available. A budget monocular build can be done for as little as $300, or a dual tube set up for under $800. A great introduction to night vision without a massive investment, PVS14’s are around $3K. A dual tube or monocular housing are available. To have a complete functioning unit, here's everything you'd need to purchase. You will also need to decide on a power supply. Printed Housing V760-A3, V760-A5, or V780 displays (2) RunCam Night Eagle 3 IR Camera (2) Alpha Parts Kit ( available at Vonscherfarms) 2 8mm CS Lens ( also available at Vonscherarms) Few feet of 20-22 gauge wire

Price: 60 USD

Location: Cleveland, Ohio

End Time: 2025-01-31T15:09:27.000Z

Shipping Cost: 5 USD