Pro Body Slotter for Pinewood Derby Cars

Description: This product is for Pinewood Derby races. It can also be used for Awana, Royal Rangers and other organizations if allowed by your race rules. PLEASE SEE BOTTOM OF PAGE FOR COMBINED SHIPPING INFORMATION! Pro Body Slotter for Pinewood Derby Cars The Pro Body Slotter and a hack saw is all you need to cut new axle slots in your pinewood derby block. New axle slots can be cut to replace improperly cut factory slots or extend the wheel base. Features: Now you can cut accurate axle slots in a pinewood derby car block with this tool and a standard hack saw. New axle slots are needed if the existing slots were not cut straight or if you want to alter the wheelbase of your pinewood derby car. You can also cut slots in the top of the block then cut the block in half to make two blocks. Specs: To use the Pro Body Slotter, you will need: Hack saw Extra hack saw blade Vice or "C" clamp Square or other right edge tool Pencil It is best to cut axle slots before you shape your block. What you get: Pro Body Slotter Tool Other Options: A hack saw and an extra hack saw blade are needed to use this tool. INSTRUCTIONS 1. Test fit the tool on the bottom of the block with the two "ears" positioned on the side of the block. If the tool will not fit onto the block, use course grit sandpaper to reduce the width of the block until the tool fits slightly loose. 2. Using a square, draw a straight line on one side of the body block (opposite of the holding screw) in the desired axle slot positions for both front and rear axle slots. Extended wheelbases should be positioned no less than 5/8" from the end of the block to prevent the wheels from extending past the ends of the car. 3. Position the tool on the bottom of the block with the two "ears" on the sides of the block. Align the index mark on the tool with the line corresponding to the location of the new axle slot. 4.Clamp the tool in place by tightening the 3/32" set screw with the provided hex wrench. Tighten it just enough to hold the tool safely in place (do not over tighten). The set screw will make a small dimple in the block that will be hidden behind the wheel but can be easily filled with a dab of wood putty. 5. Install two blades in a standard hack saw frame in opposite directions (teeth forward in one and backwards in the other). We recommend 24 teeth per inch for a good cut and proper width. 6. Place the block in a bench vice or clamp it to a table to help hold it during the cut. Cut until the blade reaches the bottom of the tool's slot. 7. You now have a perfect axle slot! YES, WE OFFER COMBINED SHIPPING ON MULTIPLE ITEMS: If you would like to purchase more than one item, from either multiple auction listings and/or more than one of the same item, just do the following! When purchasing MULTIPLE items, all you have to do is order each item using the "Add to cart" button at the top of the items listing page. When you add an item to your cart, just hit the "continue shopping" button beneath your cart items to go back and choose more items to add to your cart. Once you are done adding items and are ready to pay, just hit the "proceed to checkout" button beneath your cart items, (right next to the "continue shopping" button). You can now pay for your entire purchase and shipping will be combined for you. You will be able to see the combined shipping cost before you commit to buy. That's it! If purchasing just ONE item, use the "Buy It Now" button at the top of the items listing page. RETURNS: Full refund on any returned item within 60 days of purchase. We offer hundreds of items to help you build fast Pinewood Derby cars. Browse through our eBay store to see how we can help you.

Price: 16.95 USD

Location: Centralia, Washington

End Time: 2023-10-29T23:02:41.000Z

Shipping Cost: N/A USD