Paintless Dent Repair Body Kit + Glue Gun Auto Repair

Description: Fast deliveryTechnical supportAfter-sales service≡ShopContactRatingseBay MessagePaintless dent removal kit for car/motorcycle bodyworkDescription:Complete paintless dent removal kit. Ideal for removing dents (without sharp edges) from your bodywork. This kit includes absolutely all the accessories necessary for its use. Don’t hesitate to watch demonstration videos by searching for “paintless dent removal tutorial” on YouTube.IMPORTANT: if you are not sure whether this kit is suitable for your bump, do not hesitate to contact us before purchasing. THIS KIT IS NOT SUITABLE FOR REMOVING HAIL IMPACTS. A BODYWORKER IS IMPERATIVE IN THIS CASE.• Manufactured by BGS Do It Yourself® Germany• Adjustable spacing: from 75 to 125mm• Glue gun power: 40W• Ø of glue sticks: 11mm• Suitable for removing dents of 5cm in diameter (possibility of going further by starting at one edge and repeating the manipulation)The kit includes:• 1 glue gun• 3 special glue sticks for bodywork (lg. 20cm)• Replacement poles (lg. 30cm) available via this LINK• 1 bump repellent pencil/needle (Pecker)• 1 paintless dent removal device• 1 bottle of separating agent (20ml)• 1 spatula• 1 notice in French, English and German (provided by email on request if absent)Notice:1 – Insert the glue stick into the glue gun.2 – Plug in the gun and let it heat up for 15 minutes.3 – Clean the area to be dented using a soft cloth (not included) and a cleaning product (not included).4 – Remove the glue present on the central disc if you have already used the kit before.5 – Apply a little special glue to the dent removal disc then stick it to the center of the dent. Hold in place for ten seconds.6 – Place the device on the disk (the disk must be positioned in the center of the device). Adjust the spacing of the outer support pads using the wing nuts.7 – Slowly screw the nut onto the central disc (the one stuck to the bodywork) until pressure is exerted and the dent comes out. Stop when the bump is out.8 – Repeat this operation 4 to 7 several times if the central disc comes off by adjusting the quantity of glue.9 – Unscrew the central nut (that of the glued disc) and remove the device (by removing the central disc).10 – To remove the glue disc stuck to the bodywork, apply a few drops of separator agent to the glue and leave to act for a few seconds then use the spatula provided to peel off the glue disc.11 – In case you have a slight dent coming out, use the Pecker Pencil provided to push it out by lightly hitting the pencil using a hammer (not supplied).12 – Adjust until you obtain a very smooth surface. You can place a powerful lamp parallel to the bodywork to better see the condition of the bodywork.Usage and common sense precautions:1 – Make sure the work surface is dry and free of grease before starting work.2 – The support pads must not rest on the bump, but outside the bump, at the risk of damaging a part of the kit (disc or crosspiece); This scenario cannot give rise to any warranty coverage in the event of breakage.3 – Warning: although the separator agent is specially designed for this use, it is not recommended to apply it to the bodywork. Carry out a test beforehand on an invisible part of the bodywork to ensure that the product does not damage your bodywork. Prolonged application could damage the varnish or paint.4 – For the above reasons, we do not recommend the use of this product (separating agent) to clean your bodywork.5 – Be very careful not to hit too hard with the Pecker pencil which could damage the bodywork.6 – Although this kit is very easy to use and accessible to everyone, do not improvise as a bodybuilder/painter if you are not sure of yourself. You could do more serious damage and still have to go to a body shop/painter to restore your bodywork. We cannot be held responsible for any damage caused by the use of this kit.7 – Wait until the glue is liquid before using the hot glue gun. If the glue is not liquid enough you risk damaging the gun.8 – Not all dents can be removed using this kit (Ø > 5cm, presence of a sharp edge, aluminum sheet). Do not hesitate to consult us before purchasing.Delivery :All our products are in stock in our own warehouse to ensure fast shipping (see shipping time in delivery details provided by eBay)• Delivery method according to your choice in the delivery options (likely to be modified in the event of multiple purchases but always fast and with tracking)• Chronopost: delivery on D+1: next working day (Monday to Friday) - No delivery by Chronopost for Corsica (all orders will be canceled) • Colissimo: delivery in D+2: 2 working days (Monday to Saturday)• MondialRelay: BE CAREFUL check the relay point when finalizing the transaction• Applicable VAT: VAT of the recipient's country for the European Union (e.g. : FR 20% - BE 21% - DE 19% - IT 22% - ES 21% - SE 25% - DK 25%. Rest of the world (including overseas territories, Canary Islands, Switzerland, etc.): 0%Link to safety data sheet: Link to user manual: PaymentDeliveryServiceOpen Monday to FridayFast shippingsee announced deadlineContactVBAss10 rue de Petit Ebersviller57730 Valmont✆ 07 56 81 65 56Complete paintless dent removal kit. Ideal for removing dents (without sharp edges) from your bodywork. This kit includes absolutely all the accessories necessary for its use. Don’t hesitate to watch demonstration videos by searching for “paintless dent removal tutorial” on YouTube. 3 – Warning: although the separator agent is specially designed for this use, it is not recommended to apply it to the bodywork. Carry out a test beforehand on an invisible part of the bodywork to ensure that the product does not damage your bodywork. Prolonged application could damage the varnish or paint. 6 – Although this kit is very easy to use and accessible to everyone, do not improvise as a bodybuilder/painter if you are not sure of yourself. You could do more serious damage and still have to go to a bod See also this products:

Price: 38.45 USD

Location: Altviller

End Time: 2024-12-24T04:41:31.000Z

Shipping Cost: 0 USD