Nitek FSS20111S Single Channel Fiber Optic CCTV System

Description: Nitek FSS20111S Single Channel Fiber Optic CCTV System Also known as: N1-FSS20111S Nitek's FSS20111S is a single fiber channel Universal-Mode video and data system in which both video and data are transmitted over the same fiber. The FSS20111S is a complete system that includes transmitter and receiver units. Nitek's unique Universal-Mode optics allow the same unit to be used with single-mode or multi-mode fiber optic cabling types. The 2000 Series fiber optic transmission systems are designed to provide point-to-point, broadcast quality video transmission at an affordable cost, without compromise. The video is transmitted in a real time full bandwidth digital format. This insures the highest quality regardless of distance. By transmitting the video in an uncompressed format, there is no latency or loss of video quality. Transmitter and Receiver are equipped with LED indicators which provide power and link status. Features: Real time digital video eliminates signal degradation associated with distance. Universal-ModeT allows the same unit to be used with multi-mode or single-mode fiber without any set up or field configuration. Directly supports all NTSC, PAL or SECAM video formats. 2000 Series Transmitters and Receivers are equipped with LED status indicators to provide at-a-glance power and link status Broad operating temperature range for use in protected outdoor applications. Technical Specifications: Optical: Accepts both multi and single mode fiber Multi-mode: 50/125 or 62.5/125 to 1.2Km Single-mode: 9/125 to 20Km Wavelength: Transmitter: TX 1310nm/RX 1550nm; Receiver: TX 1550nm/RX 1310nm Fiber Connector: SC (IEC 61754-4) Signal to Noise Ratio: 65dB min. Operating Temperature: -35 to 70 degrees C/ -31 to 158 degrees F Relative Humidity: Up to 95% non-condensing Power Requirements: +5VDC Power Pack (Provided) Dimensions: 5.0 x 4.0 x 1.0 including tabs and BNC Compression: None, Uncompressed Input / Output Level: 1V p/p nominal Input / Output Impedance: 75 Ohm Unbalanced Bandwidth: 8Hz Differential Gain: 2% (typical) Differential Phase: 0.7 Tilt: 0.5% Power Connector: 2.5mm (ID) x 5.5mm (OD) Barrel Video Connector: BNC Video Standard: NTSC/PAL/SECAM Data Format: RS422 (two wire)/RS485 (four wire) Data Direction: Bi-directional Data rate: Up to 300Kb/s

Price: 565 USD

Location: Charlotte, North Carolina

End Time: 2025-02-05T21:00:18.000Z

Shipping Cost: 0 USD