New Stepper motors Sanyo Denki - DIY CNC ROUTER MILL LATHE ROBOT MAKERBOT

Description: Remember my motors are all NAME BRAND stepper motors made for heavy industry, NOT the cheap non-name brand motors made for retail, those stepper motors heat up, make lots of noise and don’t last. They usually have NO removable connection wires, there wires come right out of the motor, be aware of the ALL BLACK MOTORS.In the USA shipping is $6.00 for the 1st motor and $2.00 for each additional motor. CNC ROUTER ROBOT REPRAP MAKERBOT Normal 0 MicrosoftInternetExplorer4 NEMA 17 Sanyo Denki PIN5 / RED = A PIN3 / BLUE= B PIN4 / YL = A- PIN2 / ORG = B-PIN1 / WHT = COMMONPIN6 / BLK = COMMON Description Volts: Up to 36 volts 1.8 deg 200 steps/rev when full-stepping2.0 ohm motors Shaft is 4mm diameter 6 wire connection for uni-polar or 4 wire connection for bi-polar Current per Phase: 1.2A unipolar .85A bipolar External Depth: 39mm External Length / Height: 42mm External Width: 42mm Frame Size: NEMA 17 Holding Torque: unipolar 42.48 oz/inch (0.3N-m) bipolar 59 oz/inch (.42N-m) THE ATTACHED VIDEO THIS REPRAP OWNER IS USING THIS MOTOR YOU CAN SEE ONE ON THE PRINTHEAD

Price: 5 USD

Location: Fullerton, California

End Time: 2024-08-26T03:25:04.000Z

Shipping Cost: 6 USD