Description: Water Cold Sealing Flange with Valves & Vacuum Gauge for 100mm dia.Tube - EQ-FG-100WC FREE SHIPPING !! USED - IN GREAT CONDITION, 1 BASE HAS DINGS ON IT, THE GAGUE SEEM TO BE NEEDING TO BE RECALIBRATED, NO O - RINGS OR ANY SEALANT IS PROVIDED, YOU GET THE EXACT PEICES IN THE PICTURE, NO ANY OTHER ADDITIONAL EQUIPMENT IS PROVIDED. This is a pair of sealing flange with the water cooling jacket valve for OD 100- 102 mm ( 4" ) diameter processing tube. If you cannot use a ceramic block in two ends of the tube, you must use the water cooling jacket to keep the flange cool (otherwise silicone o-ring may get damaged) Made of NON MAGNETIC Stainless Steel with double high-temperature silicon O-rings on the flange. Stainless steel needle valve with 1/4" pipe adapter. The assembly kit will seal both ends of a 100-102 mm diameter ceramic and quartz tube.A vacuum gauge is installed on one side of the flange.Max. The furnace working temperature is 1150°C without thermal block if the tube furnace is installed with this water cold flange. Must put a refractory tube block in front of the flange (see picture below) to avoid heat radiation melt silicone O-ring. You may order a ceramic block in related products.Please do not over tighten the three hex screws on the flanges to avoid overpressure incidents. The recommended torque is 35~40 inch-lbs.For liability considerations, MTI does not recommend or endorse the use of any toxic, flammable or corrosive gases with our flange assemblies
Price: 415 USD
Location: Knoxville, Tennessee
End Time: 2024-12-28T20:43:27.000Z
Shipping Cost: 0 USD
Product Images
Item Specifics
All returns accepted: ReturnsNotAccepted
Brand: MTI Corporation
Country/Region of Manufacture: United States