MTI Corp Lab Tube 7KW Vacuum Induction Melting Furnace MODEL EQP-134 SP-15AB

Description: MTI Corp Lab Tube Induction Melting Furnace MODEL EQP-134 7KW Vacuum Induction Melting System w/ 60mm Tube & Manual Temperature Control - SP-15AB MANUFACTURER OEM WEBSITE DETAILS SP-15VIM is an economic vacuum induction heating/melting system with complete accessories, including SP-15AB Induction Heater, Quartz Tube with Flange & Valve, Graphite Crucible & Refractory Assembling, 4L/m Recirculating Water Chiller, Vacuum Pump, and Mobile Cart. It is an ideal tool for researching new metallic alloys with both melting points < 1900ºC and quantity < 100g. WARNING: Understand the standard procedure for vacuum melting and inert gas melting prior to operation. Read the manual carefully. Monitor and properly control the inside pressure of the reaction vessel at all times during operation. Otherwise, failure of operation may result in irretrievable damage to the equipment or personal injury. SPECIFICATIONS: Working Voltage: 220V AC, 50/60Hz, Single PhaseWorking Current: 34 Amp (40A breaker required)Max Input Power: 7 KWOutput Frequency: 30 - 80 kHz AdjustableDuty Cycle: 80%Induction Coil: 70mm (OD) x 65mm (ID) x 80mm(H) Auto Heating Time: 1-99 secondsAuto Dwell Time: 1-99 secondsAuto Cooling Time: 1-99 secondsAir Cooling: Rear FanProtection: Automatic water pressure, over-temperature, and overpower protectionVacuum Flange: Stainless Steel Flange with high-temperature silicone o-ring and self-tighten structureTwo valves and a vacuum gauge installed on the flange.Half Open Quartz Tube is included with dimensions of 60mm (OD) x 57mm (ID) x 250mm(L)KF25 connector and 1000mm long SS pipe is included for connecting to the vacuum pumpClick here to buy a complete set of the flange setGraphite Crucible: 1.5"(OD) x 1.25"(ID) x 3.75"(Deep) Crucible included (Note max. melt weight is about 50% volume)Refractory Assembling: Complete refractory assembling made of alumina, including bottom crucible support, crucible holder and cover No temperature display and control. Customers will determine the temperature by experience via adjusting output power.Automatic temperature control with a thermal couple is available upon request at the extra cost. Temperature range: 5 - 30°CWater Flow Rate: 58 L/minWater Tank: 15 Liters made of stainless steelNote: It is recommended to use a specific coolant to get the best performance. It is normal to wait a couple of minutes for cooling down after several trials of heatingNote: the input voltage for the water chiller is 220V One 156L/m Rotary Vane Vacuum Pump is includedRate: 156 L/minMax. Power Consumption: 0.4KW / 0.37KWFor US customer, a 110V Vacuum pump will be included Structure: Steel Frame Mobile Cart600mm(L) x 800mm(W) surface for placing Induction Heater & Quartz Tube with Flange Induction Heater: 18.5"(L) x 12"(W) x 17"(H) (470mm x 300mm x 430mm)Water Chiller: 18"(L) x 8.7"(W) x 28"(H) (460mm x 220mm x 530mm)Heavy Duty Mobile Cart: 600mm(L) x 800mm(W) x 597mm(H) The heater will shut down if overpower occurs. Please reduce the coil cycle number or sample size to keep the heater operating under Max power Melting time and temperature are related to materials, the crucible, refractory insulation, etc. Have your alloy's composition, melting point, and quantity to be melted prepared. The Induction Melting System is designed for use under vacuum and low pressure < 0.02 MPa / 0.2 Ba. A pressure regulator must be installed on your input gas tank and have the output gas pressure set below 3 PSI at all times after opening the gas tank with the gas maintained in a continuous flowing condition. Gas buildup with pressure levels exceeding over 3 PSI may cause irreversible damage to the furnace chamber.

Price: 8500 USD

Location: Indianapolis, Indiana

End Time: 2025-01-10T03:03:50.000Z

Shipping Cost: N/A USD