Monster energy 8.5”T X 7”W 16g Steel plasma cut sign

Description: Monster energy 16g cold rolled steel, approximately 8.5 tall 7” wide, unpainted. Condition is "New". Free shipping! Item comes wire brushed and ready to be painted. I personally prefer rust oleum, but the basics are the same no matter what paint you choose. Please wipe item down with glass cleaner or rubbing alcohol to remove dirt and oils from fingerprints. Spray painting, when done properly, is a great way to finish a project quickly. Primer allows the paint to adhere better by providing a uniform surface, and will help it last longer. It can also seal a porous surface, block out stains from bleeding through the topcoat, prevent rust formation on steel. When surface is clean or lightly rusted, clean surface and use Stops Rust Clean Metal Primer. Always spray paint outdoors or in a well-ventilated area such as an open garage. And avoid spray painting in windy or dusty conditions. Make sure to cover the surrounding area to protect from spray mist – use a drop cloth for larger objects, or newspaper for smaller objects. You can also turn a cardboard box on its side and create a handy spray booth. Follow the instructions on the product can regarding preparing the can for painting. Typically, this means shaking the can for one minute after the mixing ball inside begins to rattle. And shake the can often during use to keep the paint properly mixed. Also check the instructions for the recommended distance from the surface being painted. Also keep in mind recommend drying temperatures. It’s important to keep the can the same distance from the surface to ensure proper coverage and a smooth, even finish without overspraying. Spray in a steady, back-and-forth motion, slightly overlapping each stroke. And keep the can in motion while spraying to avoid drips. It is better to do multiple light coats. If you experience imperfections sand area and reapply.

Price: 20 USD

Location: Leipsic, Ohio

End Time: 2025-01-12T20:40:57.000Z

Shipping Cost: N/A USD