MIG Welder 220V Gas Gasless Lift TIG Stick Digital Display 200A Welding Machine

Description: MIG Welder 220V Gas Gasless Lift TIG Stick Digital Display 200A Welding Machine. Package content: 1 x MIG Welder (fixed 220V power plug) 1 x 9.84ft (3m) MB15 MIG Welding Torch 1 x 6.56ft (2m) electrode holder 1 x 6.56ft (2m) earth clamp 1 x gas hose 1 x 0.5KG flux cored welding wire (φ0.8)Product Description Why HUGEWELD MIG205 HUGEWELD MIG-205 4 in 1 multi-process 220v welder is powerful helper in welding, The IGBT inverter technology provides high power in a light. It's designed for for hardware, decoration, car modification, equipment and factory maintenance .This units are capable of performing mig, lift tig and stick welding. HUGEWELD WELDING MIG205 Welder Specifications Input voltage: 220V Single Voltage No Load Voltage: 60V Power factor: 0.73 Efficiency: 80% Wire feed speed(m / min): 2-15 Wire feeder type: All-in-one Suitable plate thickness (mm): 0.5-5 Insulation grade: F MIG Welding Machine 200A IGBT Inverter 4 in 1 mig gas/mig gasless/arc/lift tig support MIG gasless(flux core wire) and gas(solid wire) welding: supports 2lbs/10lbs .030’’ or .040’’ wire to weld over .030’’ thickness carbon steel stainless steel/mild steel. Stick Welding: when you switch to “STICK” on the panel(arc welding) and adjust the current as needed,welding well with 3.2mm rod 7018 1/8″, 6013 and 7018 3/32″as well. Lift TIG is optional(need buy extra TIG lift torch,not included inside product). Package content: 1 x MIG Welder (fixed 220V power plug) 1 x 9.84ft (3m) MB15 MIG Welding Torch 1 x 6.56ft (2m) electrode holder 1 x 6.56ft (2m) earth clamp 1 x gas hose 1 x 0.5KG flux cored welding wire (φ0.8) How should I adjust the parameters on the machine ？ A Digital Control Multifunction Panel The machine use full digital panel display , Wire feeding speed and welding voltage centralized regulation can be achieved. It is easier to adjust welding parameters.Thanks to digital control, the machine comes with synergy software, it match wire diameter, material and current. Excellent choice for freshman welder and easier for welding professionals. Additional voltage and inductance setting for professionals to find the precise welding performance for different project. Welding mode shift button: MIG/STICK/LIFT TIG functions. Long press 5 seconds to shift Current display to wire feeding speed display at MIG MODE. Voltage display: Displays preset current and actual welding current. Current display or wire feeding speed: When [M/min] light is on, the wire feeding speed is displayed.When [A] light is on, the current is displayed. This function is available in MIG mode. Press and hold for 5 seconds to default setting. The button is available in MIG mode Voltage minor adjust function. The voltage adjustment range from +30% to -30% Inductance adjust function. The inductance adjustment range from +50% to -50% By default, current linkage voltage regulation or wire feeding speed linkage voltage regulation. Wire material and wire diameter selection. In MIG 205, installed with latest software to provide the best database of welding. Flux refer to Flux cored, CS refer to Carbon Steel, SS refer to Stainless Steel. The button is available in MIG mode. Parameter adjustment knob. Fast adjustment: Press to hold and rotate the knob; Slow adjustment: Rotate the knob only. Only adjust the Current when Stick and Lift tig mode. Wire Installation and Available Sizes Messy wire is wrong Do not load messy or rusted wire directly into the wire reel, this is the wrong approach. When you finish the work, the welding wire needs to be stored in time. The welding wire head should be inserted into the hole of the plate to avoid the welding wire becoming messy. The wire also needs to be placed properly to avoid rusting. Neat wire is right To install a fresh reel of welding wire neatly into the wire feeder. The hole position of the wire plate should be aligned with the fixed plug on the shaft. The wire coil should be rotated and loosen the wire, to prevent the wire from loosening, the new wire disk head is usually inserted into the fixed hole at the edge of the wire. In normal use, to prevent the bending of the wire to be stuck, please cut this part of wire. How to weld wires of other diameters ( 0.6, 0.8, 0.9mm etc.) 1, Prepare a wire feeding wheel that matches the diameter of the welding wire. The knurled wheel or U-shaped wheel is used for flux cored welding wire, and the V-shaped wheel is used for solid cored welding wire. 2, Prepare for welding according to MIG mode. 3, Select the option close to the actual welding wire diameter on the control panel. 4, Optimize voltage matching parameters through Voltage minor adjust knob. Note: The package only includes 0.8/1.0mm wire feeding wheel, other sizes must be purchased separately. Note: The package only includes 0.8/1.0mm wire feeding wheel, other sizes must be purchased separately. Support 1KG (2.2lbs) / 5KG (11lbs) welding wire A powerful welding machine is not only functionally diverse, but also requires powerful hardware. MIG205 supports not only 1kg wire but also 5kg wire. When the welding workload is heavy, it is no longer necessary to replace the welding wire frequently, and the job can be completed at one time. 0.030”(0.8mm)/0.040 (1.0mm)diameter 4”（100mm 1kg）wire spool 0.030”(0.8mm)/0.040”(1.0mm)diameter 8”(200mm 5kg) wire spool eter 8”(200mm 5kg) wire spool No more worrying about errors The fault is no longer just the OC light on, but has a specific fault code, which can more accurately locate the error and solve the problem as soon as possible! Over current, overheating fault display: The welding machine over flow failure display Err 001, at (Multifunctional data display window) display continuously flashing, The welder does not work properly this moment. Turn off the welder for 1 minutes and restart it. Failure display of wire feeder: The welding machine overheat failure display Err 002, at (Multifunctional data display window) display continuously flashing, The welder is overheat, please stop welding and let the machine recover to normal working temperature. Wire blocking: The welding machine over flow failure display Err 003, at (Multifunctional data display window) display continuously flashing. The wire feeding is block. Please open the side plate to check on the wire feeder and torch linear. New design - not just looks Inductance With adjustable inductance adjustment function, but is only effective in MIG mode, it has no effect in STICK, and LIFT TIG modes.Voltage minor adjust function.The inductance adjustment range from ±50% . The role of the inductor is: 1, Adjust the growth rate of short-circuit current to reduce splash. 2, Adjust the short circuit frequency. 3, Adjust the burning arc time and control the arc heat. 4, Control weld penetration. Overcurrent Protection After the machine is turned on, there will be no response for 3 seconds, this is to protect the overcurrent and prevent the instant surge when the machine is turned on. Welding method STICK Manual Welding: Pull welding is recommended, which is called right welding, that is, pull welding from the left to the right. Gas Protection Welding-Solid wire: Push welding is recommended, which is called left welding, that is, push welding from the right to the left. Gasless Welding-flux cored wire: Pull welding is recommended, which is called right welding, that is, pull welding from the left to the right.

Price: 159.25 USD

Location: Hebron, Kentucky

End Time: 2024-12-06T11:29:55.000Z

Shipping Cost: 0 USD