Matek H743-WING V3 Flight Controller

Description: Matek's H743-WING V3 Flight Controller arrives with new features and improvements over the original. This FC features a STM32H743VIT6 MCU running at 480MHz, dual gyro - ICM42688-P(SPI1) + ICM42605(SPI4), DPS310 (I2C2) barometer, and much more. Compared to V2, the board now has updated gyros and color has changed to blue. Specifications:MCU: STM32H743VIT6, 480MHz , 1MB RAM, 2MB FlashIMU: ICM42688-P(SPI1) + ICM42605(SPI4)Baro: Infineon DPS310 (I2C2)OSD: AT7456E (SPI2)Blackbox: MicroSD card slot (SDIO)7x Uarts (1,2,3,4,6,7,8) with built-in inversion.13x PWM outputs(including “LED” pad)2x I2C1x CAN6x ADC (VBAT, Current, RSSI, Analog AirSpeed, VB2, CU2)3x LEDs for FC STATUS (Blue, Red) and 3.3V indicator(Red)1x SPI3 breakoutUSB/Beep Extender with Type-C(USB2.0)Dual Camera Inputs switch5V/9V(12V) for Camera/VTX power switchHigh-Precision Current Sense (90A Continuous, 220A Peak)Battery Voltage Sensor: 1K:10K (Scale 1100 in INAV, BATT_VOLT_MULT 11.0 in ArduPilot) ADC VB2 voltage divider: 1K:20KADC AirSpeed voltage divider: 20K:20KStatic power 160mA@5V Mounting: 30.5 x 30.5mm, Φ4mm with Grommets Φ3mmDimensions: 54 x 36 x 13 mmWeight: 30g with USB extender Firmware:ArduPilot(ChiBiOS): MATEKH743 INAV: MATEKH743 PDB:Input voltage range: 8~36V (3~8S LiPo) w/TVS protection2x ESC power padsCurrent Senor: 220A, 3.3V ADC (Scale 150 in INAV, 66.7 A/V in ArduPilot)Sense resistor: 90A continuous, 220A peak. BEC 5V output:Designed for Flight controller, Receiver, OSD, Camera, Buzzer, 2812 LED_Strip, Buzzer, GPS module, AirSpeedOutput 5.15 +/- 0.1V DCContinuous current 2 Amps, 3A Peak BEC 9V /12V output:Designed for Video Transmitter, Camera, Gimbal ect.Continuous current 2 Amps, 3A Peak12V option with Jumper pad BEC Vx output:Designed for ServosVoltage adjustable, 5V Default, 6V or 7.2V via jumperContinuous current 8 Amps, 10A Peak BEC 3.3V output:Linear RegulatorContinuous current: 200mA Includes: 1x Matek H743-WING V3 Flight Controller 1x USB (Type-C ) / Passive Buzzer Extender 1x 20cm JST-SH-6P to JST-SH-6P cable for USB Extender 2x 20cm JST-GH-4P to JST-GH-4P cable for CAN & I2C Port 1x Rubycon ZLH 35V 470uF Capacitor Dupont 2.54 pins (Board is shipped Unsoldered)

Price: 74 USD

Location: Hopkinton, Massachusetts

End Time: 2024-11-18T06:37:08.000Z

Shipping Cost: N/A USD