Marine Hatch Adapter for Promasters

Description: Patent Pending adapter matches the contour of the OEM roof so a hatch mounts to a flat surface. Prevents distorting the roof sheet metal and can be used as an aid for locating the hatch. They are CNC machined out of UV and fire resistant expanded PVC. The offset measurement is taken from the center line of the roof to the center of the hole you will cut. We can make other adapters for other hatches and positions. If you do not see one listed please contact Kim or message us. 541-49O-4292 Adapter Install procedure: We recommend 3m Window-weld adhesive which you can get at Napa. Locate and cut the hole. You can use the adapter as a guide to mark the hole. Stay clear of roof supports, obviously. Make a tape line 1/4" beyond the adapter perimeter. De-gloss the area with a Scotch- brite pad. No need to scuff. Just dull the paint. Clean with isopropyl alcohol and let dry thoroughly. Blow dryer if it's wet and/or cold out. Apply a good amount of the Window-weld on the face of the adapter. Then press the adapter down onto the roof until the adhesive oozes out the sides. It's not necessary to clamp. If you do, use a lot of lightly set clamps and spread out the clamp force over the whole surface area. Using the adhesive that oozes out, make a fillet around the adapter with a double gloved finger. Pull the tape within 15 minutes. Cure is fast on outside. Let cure overnight and then proceed with the hatch install per the hatch instruction. Seal the adapter and onto the roof about 1/2" with brush on bed-liner or Flexseal from the TV guy works well. Good idea to check the integrity and reapply the sealant every so often. Dicor self leveling sealant also works but looks a little messy. Hatch is not included. If you have questions about this product you can call Hein at 541-49O-5O98 Please consider our other items Van owner and/or installer assumes all risk associated with roof top mounted items and/or components. Van owner and/or installer recognizes and agrees that this product, and each of its component parts, is sold “as is” and that seller makes no representation or warranty of merchantability that the product is fit for any particular purpose.

Price: 180 USD

Location: Hood River, Oregon

End Time: 2023-10-23T21:06:25.000Z

Shipping Cost: 0 USD

Product Images

Item Specifics

Return shipping will be paid by: Buyer

Returns Accepted: Returns Accepted

Item must be returned within: 14 Days

Refund will be given as: Money Back

Return policy details:

Brand: Impact Products

Color: Black

Promaster, Hatch, Marine Hatch: Bomar, Lewmar

California Prop 65 Warning: Warning: This product contains chemicals known to the State of California to cause cancer, and birth defect or other reproductive harm.