LC-SC OS2 Fiber Patch Cable 5 Meters 9/125 Singlemode Duplex 10 Pack

Description: Singlemode Duplex 9/125 Fiber Patch Cable With LC to SC Connectors, 5 Meters 16.40 ft), 10 Pack. Save with 10 Packs! 5 Meter OS2 LC to SC Fiber Patch Cable | Singlemode Duplex | 9/125 | Standard Connector | 10 PackOS2 fiber patch cables are known for their outdoor use and for their loose-tube construction, compared to OS1's tightly-buffered design and indoor use, this allows OS2 fiber to transmit over longer distances. This also makes OS2 fiber cords best for use with underground and burial applications.Fiber optic cabling is the medium of choice for longer distance and challenging cabling runs. These cables are thinner than copper patch cords and immune to EMI (Electromagnetic Interference) making them perfect for riser runs and uplink cables.There are two basic types of fiber cabling, single-mode and multi-mode. The cables listed here are single mode. Inside these cables you will find three basic layers. Starting from the inside, you have the core which is surrounded by the cladding. Both are protected with the jacket on the outside. Single mode cables have a thinner "core size". The core size is simply the thickness of the optical fiber inside the cladding. The cladding is material that surrounds that core which basically serves as the boundary for the signal, keeping the light refined to the core and not allowing it to escape. The thicker the core size, the more refraction the signal exhibits, the more signal degradation that occurs and the shorter the distance an intelligible signal can transmit. For example, these cables are 9/125. 9 is the diameter of the core, and 125 is the diameter of the cladding, both in micrometers. Lastly, the jacket is the part of the cable you see. This layer protects the cable and provides easy identification based on its color. TIA-598C recommends yellow for single mode.In addition, single mode cables are more "stable" as they are only thick enough to carry one wave of light. This eliminates distortion caused by overlapping light signals making them ideal for applications that require couplers or other branching devices.LC connections allow higher density applications based on its smaller diameter. The LC connection, commonly referred to as Lucent Connection, Little Connector or Local Connector, is commonly used today for uplink modules and other devices. This connector is a "snap" type, has a ferrule diameter of 1.25mm and defined by IEC 61754-20.Push-Pull Tab connector fiber optic cables have a special tab that allows you to easily insert and remove the fiber cable when needed. The slim uniboot design allows this high-density installation cabling to be used with minimal cable management and save space in your network setup.Quick Specs:Core Size9 MicronCladding Size125 MicronModeSinglemodeMode ConditioningNoOptical ModeOS2ColorYellowJacketOFNRFiber StrandsDuplexPolish Type(both) PC - Physical ContactConnection TypesStandard, Push-Pull TabConditionNew

Price: 49.95 USD

Location: Skokie, Illinois

End Time: 2024-12-31T19:58:16.000Z

Shipping Cost: 0 USD