Description: LAUNCH X431 X-PROG 3 Key Programming Tool Immobilizer All key lost Read Write Launch X431 X-PROG 3 Vehicle Immobilizer Programmer Key programmer tool supports EEPROM read and write Key read and write X-PROG 3 advanced immobilizer & key programmer is a powerful chip reading device thatcan read/write keys to the vehicle.Compatible with X-431 series diagnostic scanners,X-PROG 3 enables Anti-theft type identification，Remote control matching, Key chip reading& matching, anti-theft password reading and anti-theft component replacement. LAUNCH X431 XPROG 3 Features: 1. Compatible with X-431 series diagnostic scanners, X-PROG 3 enables reading/writing EEPROM, on-board MCU and FOR BMW CAS4+/FEM chips, FOR Mercedes-Benz infrared keys, generating special keys, reading FOR BMW engine INS code. 2. Supported brands: For VW, For AUDI, For SKODA, For SEAT, For BMW, For MERCEDES-BENZ, For TOYOTA, etc. More models continue to be updated. 3. Supported systems: Automatic Transmission, Instrument System, CAS, Body System, Lock System, etc. 4. Reads & writes most Engine/Gearbox ECUs without disassembling the shell LAUNCH X431 X PROG 3 Advantages 1. Supports For VW/AUDI MQB platform engine ECU replacement or cloning (Read engine ECU data directly from the key). 2. Supports For VW/AUDI MQB platform gearbox ECU replacement or cloning. 3. Supports ECU replacement for the fifth-generation of For Audi (0AW/0B5) gearbox. 4. Supports reading, writing & cloning the ECU for the fourth-generation of For VW UDS engine. 5. Supports BMW E chassis 8HP gearbox ECU reprogramming to empty. 6. Works with reprogramming device to backup/restore programming data (For Bosch/Siemens engine ECU). LAUNCH X431 X-PROG 3 Core Functions 1. Integrated the functions of key matching/copy, anti-theft IC reading & writing, and ECU reading & writing, etc. 2. Supports common ECU/MCU/EEPROM major manufacturers, with over 1200 product models, and constantly updating. 3. Supports ECU replacement for all lost without disassembly for VW/AUDI non-35XX instrument (it can be read directly through independent harness without removing the IC). 4. Supports ECU replacement for the fourth-generation of For VW/AUDI engine; 5. Supports ECU replacement for the fifth-generation of For VW/AUDI Bosch and Siemens engines. 6. Supports the all lost and replacement for the fourth generation of For AUDI EZS, comfortable ECU, and KESSY IC. 7. Supports the For BMW F and G chassis 8HP gearbox ECU reprogramming to empty. 8. Supports the For BMW CAS4/CAS4+ module replacement. 9. Supports the ECU cloning and replacement for BMW Siemens engines. 10. Erase the password for Mercedes-Benz engine and gearbox within 3S. 11. Add the function of calculating the password for the Mercedes-Benz key within 1 minute. LAUNCH X431 X prog 3 Compatible with : X431 Diagun V , X431 PRO MINI , X431 PROS MINI, X431 V , X431 PRO3S+, X431 V+ , X-431 PRO GT, X-431 PRO V4.0, X-431 PRO 3 V4.0, X-431 PRO 5, X-431 PAD III V2.0, X-431 PAD V, X-431 PAD VII LAUNCH X431 X prog 3 Supports Car List : For Abarth, For Alfa Romeo, For Aston Martin, For Audi, For Bentley, For Bmw, For BriBmw, For Bugatti, For Chang An, For Chevrolet, For Citroen, For Dacia, For Dallara, For Dodge, For Ferrari, For Fiat, For Ford, For Freightliner, For Geely, For GMC, For Honda, For Hyundai, For Infiniti, For Isuzu, For Jaguar, For Jeep, For JMC, For Kia, For Lamborghini, For Lancia, For Land Rover, For Lincoln, For Mahindra, For Maserati, For McLaren, For Mercedes, For Mini, For Mitsubishi, For Nissan, For Opel, For Peugeot, For Porsche, For Renault, For Saab, For Seat, For Skoda, For Subaru, For Suzuki, For Toyota, For Vauxhall, For Volkswagen (VW), For Volvo, EEPROM It supports mainstream manufacturers of common ECU MCUs, with more than 1,000 product models and continuous updates Atmel NSCFujitsu PhilipsInfineon Renesas M16MC68HC05 Renesas M32MC68HC08 Renesas M32RMC68HC11 Renesas R32CMC68HC12 Renesas R8CMediaTek Renesas V850 SPIMicroChip Renesas V850 UARTNordic SamsungST SiLabs It supports common mainstream EEPROM manufacturers, with nearly 1,000 product models, and is continuously being updated. 4Wire GI Numonyx SSTAdesto GigaDevice OKI STAKM Grundig ONSemi ToshibaAltera HOLTEK Other WinbondAmic Hynix PCT XicorAtmel I2C Philips xUSSRBOSCH ITT Pioneer YMCCatalyst KHIC PMC SpansionChingis Macronix Ramtron SPIDallas/Maxim MicroChip Rohm NECEON Micron Samsung NSCESMT MicroWire Seiko FordEXEL Mitsubishi Siemens FujitsuFairchild Motorola Sony X-PROG3 Dtails&Functions: 1. Car key slot --------- Place the car key to perform the key matching function 2.DB26 --------- Connect to various anti-theft wiring harnesses, such as the data collection line for the fourth generation of instrument keys, etc. 3. Mercedes-Benz key infrared slot --------- Place the Mercedes-Benz infrared key to perform the key matching function 4. Car key chip hole --------- Place the key chip to perform key matching 5. Status indicator --------- Power indicator 6.DIY slot --------- Connect the anti-theft ECU pin through the cable to read and write data 7. Locker Install chip burning socket --------- Complete EEPROM or MCU data read and write operations 8.DC12V power supply --------- Connect DC12 power supply 9.DB15 --------- Connect the main wiring How to use X-PROG3 to read and write data? Method 1: use main cable to connect car OBD2 16pin interface, and X-PROG3,with LAUNCH X431 Tablet to do key matching, data reading and writing, etc. Method 2: Place the anti-theft EEPROM or MCU chip in the chip burning socket, and then insert the chip burning socket into the slot of the anti-theft matching programmer locker and lock it to realize the data interaction between the IC anti-theft chip and the diagnostic host Method 3: After removing the ECU from the car, connect the anti-theft ECU pin to the DIY slot of the anti-theft programmer through the cable to realize the data interaction between the anti-theft ECU and the diagnostic host LAUNCH X431 x-PROG 3 Specification : Input Power: DC12VWorking CurrentMax: 500mAPower Consumption: 5WStorage Temperature: -20℃~70℃Working Temperature: 0℃~50℃ LAUNCH X431 X prog 3 Packing List : - Main unit- Power adaptor- Main diagnostic cable- The fourth-generation data acquisition cable- The fourth-generation of EEPROM data acquisition cable(without dismantling dashboard)- BENCH mode cable. MCu converter V1. MCU converter V2- Mcu cable with multiple leads.EEPROM chip adaptor- Benz infrared analog acquisition key- MCU cable with multiple leadsEEPROM converter- User ManualPaymentDelivery detailsTerms of salesAbout usContact usPaymentWe accept Credit cards、Debit card、Apple Pay、Google Pay etc payment.Please contact us if you need to use another method to pay.Payment should be made within 7 days after bidding ends.Otherwise a Unpaid Item case will be opened to you.Delivery detailsShippingOrder will be shipped within 1 business day after payment confirmed.We have warehouse in USA，UK，HongKong，Australia，Russian，Germany and China warehouse.From our US/UK/RU/DE/AU warehouse via UPS or DHL eCommerce shippingDelivery time varies from 2 to 6 business days.From our Hong Kong warehouse via DHL or FedEx GroundDelivery time varies from 3 to 5 business days.From our China warehouseFor US buyers, we use e-Packet (Delivery time is 5-12 business days) or express delivery(Delivery time is 3-7 business days) .For other countries' buyers, we use China Post or Hong Kong Post(Delivery time varies from 10 to 25 business days)or Express delivery(Delivery time is 3-7 business days).We will ship according to your ebay address.Please make sure it is correct and include phone number for delivery.If you do not receive your order in the estimated time, please contact us, we would do our best to serve you solve the problem.Please include your special requests in eBay note if there is any.Terms of salesWe are authorize distributor, our all items are 100% original and Our devices have warranty, 12 months free repair for the devices. 3 months for the accessories.Please contact us firstly when you need warranty service.In case an item arrives faulty, please contact us in 30 days and keep it unused.We will instruct you on how to return and get refund or replacement.If after 30 days, or the item has been used, we have the right to decline your claim.Items should be returned on buyers' cost for repair or replacement.About us Who We Are? We are specialized dealer of On-Board Diagnostic tools and automotive electronics for more than 10 years. What Do We Have? We have office and warehouse in Australia and US to ensure fast shipment and after-sale service. We have more than 50 employees devoting to customer satisfaction. Terms of tax: We are not responsible for buyer's local taxes, please consult your local Customs for tax details.Contact us Our customer-oriented service strives for positive feedbacks with all 5 star selling ratings. Please feel free to contact us via eBay message once you have any question before you giving us negative feedback or open case. We will reply in 24 business hours. Business time: GMT8 (9:00-18:00) from Monday to Friday.
Price: 529 USD
Location: Los Angeles, California
End Time: 2024-08-01T07:17:16.000Z
Shipping Cost: 0 USD
Product Images
Item Specifics
Return shipping will be paid by: Seller
Returns Accepted: Returns Accepted
Item must be returned within: 30 Days
Refund will be given as: Money back or replacement (buyer's choice)
Return policy details:
Brand: LAUNCH
Manufacturer Part Number: Immobilizer & Key Programmer
OBD Interface: CAN, EOBD, OBD, OBDII
Type: Key Programming Scanner
Connectivity: USB
Supported System: IMMO, Automatic Transmission, Instrument System, CAS, Body
Vehicle Type: Passenger Vehicle
Features: Backlit Display, Built-In Battery, Check Engine Light Shut Off, Color Display, Internet Updateable, LCD Display, Multi-Language Interface, User Friendly
Accessories: Adapter Cable, Carrying Case, USB Cable, User Guide
Warranty: 3 Year
Interface: DB26, DB15
Input Power: DC12V
Working CurrentMax: 500mA
Power Consumption: 5W
Compatible with 1: X-431 PRO GT, X-431 PRO V4.0, X-431 PRO 3 V4.0
Compatible with 2: X-431 series diagnostic scanners
Compatible with 3: X-431 PRO 5, X-431 PAD III V2.0, X-431 PAD V, X-431 PAD VII
Compatible with 4: X-PROG 3 enables reading/writing EEPROM
Compatible with 5: on-board MCU and for BMW CAS4+/FEM chips
Compatible with 6: for Mercedes-Benz infrared keys, generating special
