Kluber Isoflex NCA 15, 50g, 0041800221

Description: Kluber ISOFLEX NCA 15 Spindle bearing grease 50g tube, Kluber Lubrication PN: 0041800221 Klüber ISOFLEX NCA 15 Spindle bearing greaseISOFLEX NCA 15 is a dynamically light grease with good pressure absorption properties for plain and spindle bearings. It consists of ester oil, synthetic hydrocarbon oil, mineral oil and special calcium soap. The product is resistant to water and protects reliably against wear Benefits for your applicationLonger rolling bearing life due to good wear protection, water resistance and pressure absorption capacityTried and tested over many years especially in high-speed and low-temperature applicationsLow heating-up of bearings due to low lubricant friction leading to longer service lifeLow running torque enables energy savings, particularly at low temperatures, hence costs savings possible ApplicationISOFLEX NCA 15 is particularly suitable for the lubrication of spindle and tapered roller bearings, threaded spindles, ball screws subject to high loads, and for all high-speed bearings, e.g. bearings in OE-spinning turbines used in the textile industry Technical specificationsArticle number4180Chemical composition, type of oilmineral oilChemical composition, type of oilester oilChemical composition, thickenerspecial calcium soapTextureshort-fibredTexturehomogeneousLower service temperature-50 °C / -58 °FUpper service temperature120 °C / 248 °FColour spacebeigeDensity at 20 °Capprox. 0,94 g/cm³Worked penetration, DIN ISO 2137, 25 °C, lower limit value265 x 0,1 mmWorked penetration, DIN ISO 2137, 25 °C, upper limit value295 x 0,1 mmKinematic viscosity of the base oil, DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 40 °Capprox. 21 mm²/sKinematic viscosity of the base oil, DIN 51562 pt. 01/ASTM D-445/ASTM D 7042, 100 °Capprox. 4,5 mm²/sSpeed factor (n x dm)approx. 1 300 000 mm/minShear viscosity at 25°C, shear rate 300 s-1, equipment:rotational viscometer, upper limit value8000 mPasShear viscosity at 25 °C, shear rate 300 s-1, equipment: rotational viscometer, lower limit value3500 mPasCorrosion inhibiting properties of lubricating greases, DIN 51802, (SKF-EMCOR), test duration: 1 week, distilled water<= 1 corrosion degreeLow-temperature torque, IP 186, -50 °C, start<= 1000 mNmLow-temperature torque, IP 186, -50 °C, running<= 120 mNmDrop point, DIN ISO 2176>= 180 °CMinimum shelf life from the date of manufacture - in a dry, frost-free place and in the unopened original container, approx.36 months

Price: 45 USD

Location: Medford, Massachusetts

End Time: 2024-10-04T21:04:37.000Z

Shipping Cost: N/A USD