ImmersionRC XuGong V2/Pro Foldable Quad copter Airframe Kit

Description: Overview This is the ImmersionRC XuGong v2/Pro Quadcopter Kit. Developed by FPV pilots, for FPV pilots, the XuGong v2/Pro is the FPV’ers Quadcopter! Designed to provide a fully immersive flight experience, and the ability to provide stabilized, high-quality aerial video footage from a tailor-made platform. The addition of an integrated brushless gimbal (optional - not included), a comprehensive onboard electronics board, and a host of other features make this the ultimate portable FPV quadcopter. Crash-Resistant Arms The XuGong features precision CNC-machined foldable arms, with a unique break-away pin. This pin takes the brunt of the punishment in the event of a hard landing, and can be easily replaced in the field. For even harder landings (sometimes referred to as crashes), the milled arms bend without breaking, and may be gently bent back into shape. Try to do this with a plastic arm! Fully Integrated Power Distribution Board A fully integrated Power Distribution Board (PDM) includes an EzOSD-based On-Screen-Display, with all of the critical flight data displayed. Not only is battery voltage, current, and battery mAh consumed displayed, but also a continuously updated estimate of remaining flight time. With the addition of a newly released EzUHF firmware revision, all critical uplink status is sent down the single PPM stream. No need for a second "i2c" link between the receiver and the OSD. Additionally, a built-in camera switch with automatic fail-over is included in case a camera fails. Portable Sport Quad The XuGong was designed to be portable, and fit easily in a small backpack. It can be taken on the ski-lift, carried up to a remote tropical island, or carried in a carry-on bag for the occasional international flight. This remotely piloted camera doesn’t require two pilots, nor a shipping container to transport it around. Telemetry Down-link The XuGong v2/Pro transmits all on-board telemetry to the ground, using the A/V down-link. Battery status, Uplink status (RSSI, Link quality, etc.), GPS position, are all available in the telemetry stream. The ImmersionRC Antenna Trackers can use this data to point a high-gain antenna directly at the model. The iTelemetry dongle provides an interface between this telemetry feed, and a smartphone/tablet, with applications available for the iOS and Android devices. Compact Size There are few products on the market that fold into such a small space, with just a few seconds required to unfold and fly. The props remain attached and no tools are required. Simply press, unfold, and fly! Integrated Brushless Gimbal An optional custom brushless GoPro gimbal, designed by one of the industry leaders, is available separately and has been integrated into the XuGong v2/Pro design. Pan and Roll signals are picked out of the single-cable Rx connection by the onboard OSD. Install a GoPro Hero 4 for stabilized 4k video footage. The Power Distribution board includes an on-board quiet switching regulator which powers the GoPro with no GoPro battery required. Features: Compact Foldable DesignLightweight frame leads to > 20 minute flight timesBuilt-in EzOSD, with multicopter enhancementsSingle-cable link to the EzUHF, with full up-link statusCarbon fiber frame, CNC milled aluminum armsIntegrated telemetry down-linkUSB port for future upgrades Specifications: Max. Prop Size: 10 Inch OSD: EzOSD-based, with Multicopter additions Flight Controller: DJI Naza Lite, -M, v2 recommended, others supported GPS: Naza GPS pickoff (Position + static Magnetometer) Camera Switch: Manual, between Flight Cam, and GoPro, with auto-failover Camera Power: 1.5A for GoPro, FlightCam powered from Video Tx Flight Cam: Bracket to mount FatShark CMOS 600TVL + others (optional accessory) Weight: AUW, RTF, ~1.5kg (typical) Folded Size: 24cm W x 30cm L x 14cm H Suitable Battery: 5200mAh 4s 10C recommended (for 20 minute flight times) Suitable Motors: 2212/920kV, DJI E300, or Tiger AirGear 350 Flight Time: Typ. 20 min Includes: Power Distribution board, with built in OSD, Camera switch, GoPro Power Supply (5.0 V), GPS Interface, Current/Voltage Sensor, PPM in/out1.5mm Matte Carbon Fiber frame platesHardwarePPM in/out cablesNAZA GPS Pickoff cable (this cable must be connected directly to the NAZA GPS. Connecting it between NAZA PMU and NAZA won’t work)GoPro cableFlightCam cableVTx video/audio cableVTx power cable9

Price: 129.95 USD

Location: Catharpin, Virginia

End Time: 2024-03-02T02:47:27.000Z

Shipping Cost: N/A USD