Description: !!!!!!!!!!!!!!CHECK MY FEEDBACK!!!!!!!!!!!!!! IGT S-PLUS CPU CLEAR AND BV SET UP CHIPS with instructions. (CODE-61?), (CODE-43, REELS TURNING SLOW -WONT RESET, DEAD/REPLACED BATTERY ON CPU BOARD) If you own an IGT S-plus slot machine, you definitely need a set of these chips (in case you need to clear the ram-or at least restart the bill acceptor.) Also, there good to just have around (in case and you will some day have to replace your CPU battery) to clear your CPU to factory settings. The BV (Bill Validator or bill acceptor) chip is needed if you have one. These two microchips work on S-PLUS machines: slant/upright (double diamond, red white blue, haywire, 5X pay etc that require a clear chip when you get error codes that you can not clear with the reset key or when you change the battery) - if you own an IGT S-PLUS -you need these chips. Easy to use: insert chip in the game chip socket of cpu, power the machine on and push menu button. SIMPLY follow the INSTRUCTIONS -INCLUDED WITH CHIPS. Works on IGT S-PLUS, new/old style boards (10Mhz & 16Mhz), regardless of which style your using -(upright, slant, roundtop.) -NOTE: The BV chip will not upgrade bill validator to accept new currency. -(chip must be replaced in validator head). You will receive a IVC123 clear chip and a SET15 BV chip in a STATIC and CRUSH proof container. Please make sure these are the chips you need for your machine. With these chips there is no need to change your jumper settings like some other ones for sale! Also, check my other auctions if you have a SP1160 eprom chip before ordering!Also included in this auction is the U1 EEPROM (which is located on the Motherboard, not the MPU board!). Sometimes doing a Ram Clear does not always work due to your U1 EEPROM being defective or is corrupted and will not clear the data stored in it. If you find that a Ram clear does not work for you and you are stuck in the dreaded “ERROR 61 loop” then it is most likely (not always) your EEPROM needs to be replace. Replacing this EEPROM requires the knowledge of de-soldering and soldering. Caution should always be taken! You will need to disconnect the wiring and remove the Motherboard! There are no instructions for this! Make sure to make note of what you disconnect and the notation of notch on the EEPROM. Install the new EEPROM with the notch in the same direction of your old one! CAUTION SHOULD ALWAYS BE TAKEN! !!!!!!!!!!!!!!CHECK MY FEEDBACK!!!!!!!!!!!!!!STEP BY STEP Simple to follow INSTRUCTIONS INCLUDED. NOTE: care must be used when handling these sensitive chips. If the Chips are installed backwards they will be destroyed!If your not sure if you have an S+ MPU board look at the one in the photos.Your MPU board must look like the one in the photos!MPU & Mother BOARDs NOT INCLUDED-SHOWN HERE JUST FOR REFERENCE!!!! Check out my feedback!!!! Please email me with any questions Sorry-No combined shipping with this item...
Price: 23.99 USD
Location: Mission Viejo, California
End Time: 2023-12-19T15:48:58.000Z
Shipping Cost: 0 USD
Product Images
Item Specifics
Restocking Fee: No
Return shipping will be paid by: Buyer
All returns accepted: Returns Accepted
Item must be returned within: 30 Days
Refund will be given as: Money Back
