Hydraulic Log Splitter Cylinder Rebuild Seal Kit Replacement 5.0" Bore 2.0" Rod

Description: 1. Compatibility: This Cylinder Rebuild Seal Kit is compatible with Bore 5.0” (Inner Diameter) x Rod 2.0” (Outer Diameter) Cylinder. Please note some cylinder rod head OD size is not the rod size. 2. Replacement: This kit includes all the seals and o-rings needed for a complete cylinder rebuild, ensuring long-lasting durability and reliability. Made with high-quality materials, this kit is designed to meet or exceed OEM fit and performance specifications. 3. Function: This Cylinder Rebuild Seal Kit provides an easy and effective way to rebuild the cylinder on the log splitter, preventing oil leaks and other cylinder damage to extend the life of your log splitter cylinder. 4. Specifications: Nylon Piston wear ring: 127mm (OD 5”) x 120.65mm (ID 4.75”) x 9.5mm (0.375” wide), Nylon Rod wear ring: 50.8mm (ID 2”) x 57.15mm (OD 2.25”) x 9.5mm (0.375” wide), Piston Square ring: 127mm x 117mm x 3.28mm (CPU), Piston O-ring (installed under the square ring): 115mm x 2.65mm(NBR), Rod O-ring: 50.8mm x 63.5mm x 5mm(CPU), Rod dust ring: 50.8mm x 60.3mm 5.5mm /7.3mm(TPU), Gland O-ring: 118mm x 5.3mm(NBR), Rod and piston assembly O-ring: 32mm x 2.65mm(NBR). 5. Superior Material: Made of premium materials and employing precision manufacturing techniques, this seals kit will absolutely rebuild your hydraulic log splitter and service for an extended period of time. 6. 100% Satisfaction Guarantee: If you're not 100% satisfied with our items, simply return it for a full refund in 60 days. Support 12 months’Warranty. Please do some measurement on your cylinder and compare with each item specification to know whether this kit fits your cylinder. Please don’t hesitate to contact us if you are not sure about the fitment. Please Read Below Carefully to Check that the Kit Fits Your Cylinder Before Use The seal kit is used to rebuilt Speeco design or compatible other brand cylinders, such as Husky, Split Master, Oregon, Dirty Hands tool and after marker cylinders oversea made with same Speeco design (but may not fit 20 years or older design). Note that it may not fit all older Speeco cylinders made with older designs. So to know whether it fits your cylinder, one good way is to disassemble and measure your cylinder to compare with each item specification. Double check each seal groove is good for our part sitting in. For Cylinder tube Bore (I.D.) 5.0" x rod (O.D) 2.0" ITEM 1 Rod dust ring: 50.8mm x 60.3mm 5.5mm /7.3mm, TPU ITEM 2 Rod O-ring: 50.8mm x 63.5mm x 5mm, CPU. There is O-ring inside. It is a compound seal ring to make sure better seal and longer life. It is one of most important seals to prevent oil leakage. ITEM 3 Rod wear ring: 50.8mm (ID 2”) x 57.15mm (OD 2.25”) x 9.5mm (0.375” wide) Nylon ITEM 4 Gland O-ring: 118mm x 5.3mm, NBR ITEM 5 Gland Backup ring: 127mm x 118.4mm x 1.5mm, PIFE (Please note: the backup ring is support O ring to against pressure, so it will be installed at outside of O-ring. See drawing for position. It is one of most important seals to prevent oil leakage.) ITEM 6+7 Piston seals: square ring and O-ring. Square ring: D127mm x 117mm x 3.28mm, CPU; O-ring (installed under the square ring): 115mm x 2.65mm, NBR ITEM 8 Piston wear ring: 127mm (OD 5”) x 120.65mm (ID 4.75”) x 9.5mm (0.375” wide), Nylon ITEM 9 Rod and piston assembly O-ring: 32mm x 2.65mm, NBR (NOTE: In mots case, this seal might not be needed to replace. This seal might be different size on some aftermarket model. We add one common size 34.5mm X 1.8mm as extra. It is standard O-ring. If our 2 O-rings are not the size with your cylinder, you can easily find it at any local store, such as Home Depot.) ITEM 10 Steel wire spring: it is option item for your cylinder rebuild. You might not need it to replace your old one if it is not damaged during disassembly. Please be sure if our wire ring OD is not same with your old one, please don’t use it. Package Includes: 11pcs Hydraulic Log Splitter Cylinder Rebuild Seal Kit Payment methods accepted: Payoneer. Our Payoneer account allows you to pay by credit card, debit card and your paypal balance. 1.Orders will be ship out within 1-3 business days after payment has cleared. Orders from Saturdays, Sundays or holidays will process on next business day and will be ship within 24 hours. 2.All of the items are shipped from our Warehouse in USA. 1. Any defective items received can be replaced or refunded. Please contact us with the item number, eBay ID and defect description within 60 days after the date of package arrived. No Claim will be accept after 60 days. 2. Return shipping fee is the responsibility of buyer unless the return is a result of our mistake. And all NON-seller mistake returns for refund are subject to 20% re-stocking fee. If you have any questions, please feel free to email our service specialists 24 Hours a Day, and we will reply you ASAP. If no response within 24 Hours, please check the spam of mail box or kindly re-send it to us. Please contact us before leaving Neutral or Negative feedback if you are not satisfied our service or products. Good communication is helpful for both of us to resolve any problems and issues. We work hard to make sure EVERY CUSTOMER 100% SATISFIED and resolve any problem for you and always leave positive feedback to all our customers. 1. Compatibility: This Cylinder Rebuild Seal Kit is compatible with Bore 5.0” (Inner Diameter) x Rod 2.0” (Outer Diameter) Cylinder. Please note some cylinder rod head OD size is not the rod size. 2. Replacement: This kit includes all the seals and o-rings needed for a complete cylinder rebuild, ensuring long-lasting durability and reliability. Made with high-quality materials, this kit is designed to meet or exceed OEM fit and performance specifications. 3. Function: This Cylinder Rebuild Seal Kit provides an easy and effective way to rebuild the cylinder on the log splitter, preventing oil leaks and other cylinder damage to extend the life of your log splitter cylinder. 4. Specifications: Nylon Piston wear ring: 127mm (OD 5”) x 120.65mm (ID 4.75”) x 9.5mm (0.375” wide), Nylon Rod wear ring: 50.8mm (ID 2”) x 57.15mm (OD 2.25”) x 9.5mm (0.375” wide), Piston Square ring: 127mm x 117mm x 3.28mm (CPU), Piston O-ring (installed under the square ring): 115mm x 2.65mm(NBR), Rod O-ring: 50.8mm x 63.5mm x 5mm(CPU), Rod dust ring: 50.8mm x 60.3mm 5.5mm /7.3mm(TPU), Gland O-ring: 118mm x 5.3mm(NBR), Rod and piston assembly O-ring: 32mm x 2.65mm(NBR). 5. Superior Material: Made of premium materials and employing precision manufacturing techniques, this seals kit will absolutely rebuild your hydraulic log splitter and service for an extended period of time. 6. 100% Satisfaction Guarantee: If you're not 100% satisfied with our items, simply return it for a full refund in 60 days. Support 12 months’Warranty. Please do some measurement on your cylinder and compare with each item specification to know whether this kit fits your cylinder. Please don’t hesitate to contact us if you are not sure about the fitment. Please Read Below Carefully to Check that the Kit Fits Your Cylinder Before Use The seal kit is used to rebuilt Speeco design or compatible other brand cylinders, such as Husky, Split Master, Oregon, Dirty Hands tool and after marker cylinders oversea made with same Speeco design (but may not fit 20 years or older design). Note that it may not fit all older Speeco cylinders made with older designs. So to know whether it fits your cylinder, one good way is to disassemble and measure your cylinder to compare with each item specification. Double check each seal groove is good for our part sitting in. For Cylinder tube Bore (I.D.) 5.0" x rod (O.D) 2.0" ITEM 1 Rod dust ring: 50.8mm x 60.3mm 5.5mm /7.3mm, TPU ITEM 2 Rod O-ring: 50.8mm x 63.5mm x 5mm, CPU. There is O-ring inside. It is a compound seal ring to make sure better seal and longer life. It is one of most important seals to prevent oil leakage. ITEM 3 Rod wear ring: 50.8mm (ID 2”) x 57.15mm (OD 2.25”) x 9.5mm (0.375” wide) Nylon ITEM 4 Gland O-ring: 118mm x 5.3mm, NBR ITEM 5 Gland Backup ring: 127mm x 118.4mm x 1.5mm, PIFE (Please note: the backup ring is support O ring to against pressure, so it will be installed at outside of O-ring. See drawing for position. It is one of most important seals to prevent oil leakage.) ITEM 6+7 Piston seals: square ring and O-ring. Square ring: D127mm x 117mm x 3.28mm, CPU; O-ring (installed under the square ring): 115mm x 2.65mm, NBR ITEM 8 Piston wear ring: 127mm (OD 5”) x 120.65mm (ID 4.75”) x 9.5mm (0.375” wide), Nylon ITEM 9 Rod and piston assembly O-ring: 32mm x 2.65mm, NBR (NOTE: In mots case, this seal might not be needed to replace. This seal might be different size on some aftermarket model. We add one common size 34.5mm X 1.8mm as extra. It is standard O-ring. If our 2 O-rings are not the size with your cylinder, you can easily find it at any local store, such as Home Depot.) ITEM 10 Steel wire spring: it is option item for your cylinder rebuild. You might not need it to replace your old one if it is not damaged during disassembly. Please be sure if our wire ring OD is not same with your old one, please don’t use it. Package Includes: 11pcs Hydraulic Log Splitter Cylinder Rebuild Seal Kit

Price: 15.9 USD

Location: Rancho Cucamonga, California

End Time: 2024-12-08T17:25:04.000Z

Shipping Cost: 0 USD