HP 8757E Network Anal, HP 85027C Direct Bridge, HP 11664A Detector (2)

Description: Integrated operation of all units tested and operation verified Units cosmetically very clean showing minimal lab use Operation and service manuals included on CD Units shipped in foamed double walled box Keysight-Agilent 8757E Base Frequency: 10MHz to 110GHz dependent on source, couplers and detectors. The Agilent 8757E scalar network analyzer measures insertion loss, gain, return loss, SWR, and power quickly and accurately. With high-performance detectors and directional bridges, and a companion Agilent source and printer, this analyzer becomes the basis of a complete measurement system with superb performance. The Agilent 8757E features three detector inputs and two independent display channels, allowing simultaneous ratioed or non-ratioed measurement of your device's transmission and reflection characteristics. HP 85027C Directional Bridge, 10 MHz to 18 GHzInput connector Type N / Test port Type N, Agilent 85027 series directional bridges (AC/DC) The 85027 series directional bridges are designed to operate with either the 8757 in AC or DC detection modes or with the 8756 or 8755 in AC detection mode. This bridge offers high directivity, excellent test port match, and a measurement range of up to 18 GHz in coax. HP11664A The HP Model 11664A Detector must be used in conjunction with the HP Model 8757 Swept Amplitude Analyzer. The 11664A detects RF signal levels from -70 to +10 dBm in the frequency range from 10 MHz to 18 GHz. Use of three 11664A Detectors enables simultaneous (amplitude only) transmission and reflection measurement via the 8757 Analyzer/. The 11664A Detector and the input stages of the 8757 comprise an ac-coupled system. This detection scheme requires 27.8 kHz square wave modulation of the RF input signal provided from the HP 8757.

Price: 1745 USD

Location: Fairfax, Virginia

End Time: 2024-11-11T02:46:21.000Z

Shipping Cost: 0 USD