Honda TRX 250EX, 250X Shock Conversion Kit + 400mm Adjustable Shocks

Description: The 400mm shocks included are own brand we have been developing for many years on adult ATVs.Generally sold separately for $249.99, they are now included with this listing for only $219.99 extra!Our shocks included have 9mm coils and are adjustable in length by unscrewing and adjusting the lower shock eye, in preload by using the included tool to tighten the ring at the top of the coil spring, and adjustable in rebound by turning the knob just below the coils and above the shock eye (you will hear up to 24 clicks for adjustment). Extended brake lines we recommend using with this kit: https://www.ebay.com/itm/313895006170 Widen the REAR of your ATV also with our Wheel Spacers: https://www.ebay.com/itm/183818839938 Note: This kit is not compatible with pre-2000 Honda 250xThis kit will allow you to mount 400EX shocks (stock or aftermarket) on your 300EX or 250X. You can also use stock or aftermarket shocks from a 450R, Suzuki Z400 or Yamaha YFZ450.We have sold hundreds of these kits, and they ARE designed and used for the harsh conditions of motocross and GNCC racing. The unique design of the mount brackets allows the kit to bolt up to the ATV withouth removing any of the stock components, including the supports for the front fenders. It is difficult to see in the pictures, but the main “C” bracket that connects one side of the shock mounts to the other, is made up of two pieces of 1/4″ thick steel for laminated strength. Again, this is designed for the enormous forces created by landing motocross jumps.Four separate adjustment heights are available just by assembling the brackets differently. This, along with the spring adjustments you will have on the 400EX shocks will allow you to tune the suspension to your driving conditions (rough trails, jumps, etc.). This is important, everyone’s driving habits are different (as well as the rider’s weight) – we need to be able to adjust our suspension.Because of the adjustments available, you could try these brackets with any stock or aftermarket shock that has 3/4 inch (19mm) wide mounts with 3/8 inch (10mm) holes. The shocks should be the range of 13 to 17 inches long.Here is some overall widths to the outside of the tires after the kits are installed (these are dimensions with stock tires and wheels on the ATV and nothing done to the rear):400EX with +6 inch Kit, Front = 47 7/8″, Rear = 45 1/2″300EX with +6 inch Kit, Front = 47 1/2″, Rear = 43 1/2″250EX with +6 inch Kit, Front = 441/2″, Rear = 41 1/2″CLICK HERE TO GO TO OUR eBay store: http://stores.ebay.com/Diamond-J-Customs_W0QQsspagenameZMEQ3aFQ3aSTQQtZkm PATENT PENDING

Price: 309.99 USD

Location: Polk City, Iowa

End Time: 2024-08-10T21:45:07.000Z

Shipping Cost: 0 USD