Hobbywing XR10 Justock G3S Sensored Brushless ESC/SD G2.1 Motor Combo (17.5T)

Description: Combo Overview: The Hobbywing XR10 Justock G3SS Sensored Brushless ESC/SD G2.1 Motor Combo has been designed with fixed, 0°, timing for spec class racing. The included SD G2.1 motor is an ideal stock motor for both 1/10 and 1/12 on and off-road racing. These two components paired together make for an ideal choice for beginners and experts alike. Note: This product photo may not fully depict the described item. For comprehensive details on the listed product, please refer to the specifications provided.Features:ESC:Built-in polarity protection. The XR10 Justock has integrated MOSFET's that if the battery terminals are connected in reverse, the MOSFET will be reverse-biased and will not allow current to flow through the systemProgrammable via OTA Wireless module or 3in1 program boxBuilt-in capacitor module eliminates the need for external capacitors and unwanted spaceRPM speed limit function supports up to 6 different speed, RPM, selections to meet the needs and demands of various competitions in the world (Set through OTA module or 3in1 box)Internal ESC timing has been set to 0 degrees and cannot be adjusted for stock racingBuilt-in BEC can support a maximum output current of up to 8A. Output voltage can be set between 6V or 7.4VCalibration or performing a factory-reset can be achieved by using this SET button. Simple and easy to useSupports both CCW (counterclockwise) and CW (clockwise) motor directionsProtection functions include: reverse polarity, battery voltage, ESC temperature, motor temperature, signal lost and locked rotor protectionESC includes the Freewheeling setting allowing for lower ESC temps enhancing drivability through cornersBuilt-in data logging for post-run reportsMotor:Use of a heat-resistant magnet attached aluminum case and double insulated windings, high precision bearings, and rotor with a strong structure guarantees outstanding performance and super durabilityBuilt-in Hall sensor non-adjustable end bell combined with a high precision and balanced rotor guarantees the user a smooth and linear power on demandSilicon O-ring seal fitted between the end bell and stator helps to conduct inner heat to the motor case and prevent dust from entering the HALL sensorDetachable structure design for daily cleaning and maintenance can effectively prolong the service life of this Justock motor and improve its operating efficiencyThis Justock motor is applicable to various 1/10th, 1/12th on-road & off-road vehicles. It can be an ideal choice for Stock or Sport class races but can also be a nice choice for newbies for practiceThe motor design is in compliance with IFMAR, and ROAR specificationsSpecifications:ESC:Continuous Current: 60ABurst Current: 380ABattery: 2S Lipo (Only 2S)Built-in BEC: 6V/7.4V @ 4A(Switch-mode)ESC programming: Independent programming portMotor Supported: Sensor and sensorless brushless motorMotor Limit: 10.5T, or greater,3650 MotorApplication: 1/10, 1/12 On-road and Off-roadCooling Fan: Powered by BECSize: 40.9x33.9x32.1mm (LxWxH)Weight: 75.4g (Including weight of wire)ROAR Approval: YesMotor:Scale: 1/10, 1/12Brushless: YesSensored: YesPole Count: 2KV Rating: 2050kVLiPo Cells: 2-3SNo-Load Current(A): 3AOuter Diameter: 35.9mm (1.413")Length: 52.5mm (2.067")Shaft Diameter: 3.17mm (0.125")Weight: 176g (6.21oz)Timing: FixedIncludes:(1) Justock G3SS ESC(1) Justock 17.5T G2.1 brushless motor(1) 5V cooling fan(1) Sensor cable

Price: 112.95 USD

Location: La Habra, California

End Time: 2024-09-08T02:11:23.000Z

Shipping Cost: 0 USD