Description: SR-2 Jib Roller The Forespar® SR-2 Jib Roller with fit shrouds from 3/16” thru 3/8” wire diameter. Use the proper size pair of insert liners according to the table below:3/8” wire – use no insert5/16” wire – use #1 inserts9/32” wire – use #2 inserts¼” wire – use #3 inserts7/32” wire – use #4 inserts3/16” wire – use #5 inserts The Jib Rollers may be placed just above or below the spreader tips; however, installation will be easier if located below the spreaders. In this instance, you can pre-assemble the parts while on deck and reduce the possibility of losing parts while hanging in a boatswain’s chair. Have a 3 inch piece of masking tape within handy reach (stick it to the shroud). Select the proper inserts, place them into the two halves of a hub and fit them around the shroud. Use the tape to loosely hold these parts together. Note that the hubs have two clearance screw holes at one end. Match these with the smaller holes at the other end of the other half. It is important that the mating faces of the inserts are parallel with the faces of the hub halves. Install the four screws supplied, tightening only to the extent that you can still slide the hub assembly up the wire shroud. Now remove the tape. Next, install the rollers. Note that one half of each roller has clearance holes for the two screws. Mate these halves that don’t have clearance holes. Run these screws tight. Now slide the Jib Roller to the desired position on the shroud and finish tightening the four hub screws until the hub interfaces are fully closed. Additional Specs (If Applicable): Shipping Information FREE Shipping only applies to the Continental 48 States. There may be additional shipping fees for items going to Hawaii, Alaska, and Puerto Rico. NO PO Boxes with UPS Shipping. Most Items ship out same day if placed before 2 PM Eastern Time. Tracking information will be uploaded into eBay when it has been shipped. You will receive an email from eBay with this notification. Our products ship from Florida, New Jersey, Arizona and occasionally from other warehouses in the United States to ensure package transit times and item availability are optimized. The estimated delivery date from eBay may be inaccurate. We offer discount overnight services for most items using FedEX Next Day Air. Returns/Refunds We cannot accept the return of software unless it was defective upon receipt. Please verify that you have the correct product prior to purchasing. Most of our items have a 30 day Return Policy. Non-Defective items must be Returned in the original packaging with all accessories and paperwork. The item must be unused and/or uninstalled. Defective items must be returned without Physical damage. If the item was damaged during shipping, please let us know within 8 hours of receipt. Please contact us prior to shipping an item to us to obtain an RMA number. You may also use the eBay return link.
Price: 50.45 USD
Location: Tampa, Florida
End Time: 2025-02-03T17:53:10.000Z
Shipping Cost: 0 USD
Product Images
Item Specifics
Restocking Fee: No
Return shipping will be paid by: Buyer
Returns Accepted: Returns Accepted
Item must be returned within: 30 Days
Brand: Forespar Performance Products
UPC: 028026121103
MPN: 210003
Short Description: Forespar Sr-2 Jib Roller
Shipping Weight: 1.400000