For Toyota 2001-2008 Sequoia 1999-2009 4Runner 2004-2006 Tundra Remote Key Fob

Description: Product DetailsCondition: 100% Brand NewHigh QualityFCC ID: HYQ12BBX , HYQ12BAN，HYQ1512YFrequency: 314 MHzCircuit Board: with Compatibility WithFor 2001-2007 Toyota SequoiaFor 1999-2009 Toyota 4 RunnerFor 2000-2006 Toyota Trunda Important Note 1. This key is only suitable for the Part Number:HYQ12BBX , HYQ12BAN, please check yours. If it is different, please contact us and we will find the suitable key for you2.Program by qualified locksmith required. Most remotes can be self-programmed. If these procedures do not work, you must have your remote programmed by a professional automotive locksmith or dealership.Procedure #1 (03-09 4Runner, 04 Highlander, 04-05 Rav4, 08 Sequoia)1. Start with the key out of the ignition, drivers door is open, all other doors and trunk closed and drivers door is unlocked.2. Perform these steps within 5 seconds. A. Insert the key into the ignition (Do NOT Turn it) and Pull key out. B. Insert the key into the ignition (Do NOT Turn it) and Pull key out.3. Perform these steps within 40 seconds. A. Close then open the drivers door. B. Close then open the drivers door. C. Insert the key into the ignition (Do NOT Turn it) and Pull key out.4. Perform these steps within 40 seconds. A. Close then open the drivers door. B. Close then open the drivers door. C. Insert the key into ignition and leave it in the ignition. D. Close the drivers door. E. Turn the ignition to ON (Do NOT Start or crank engine) then back to OFF. F. Remove the key from the ignition.5. Within 3 seconds, the power door locks should lock then unlock automatically indicating successful entry into programming mode. Return to step 1 if the door locks do not cycle at this point.6. Perform these steps within 40 seconds. A. Press the lock and unlock buttons on the remote simultaneously for 1.5 seconds. B. Immediately after letting go of the lock and unlock buttons, Press the lock button by itself and hold for 2 seconds. Within 3 seconds, the door locks should lock and then unlock once indicating successful programming. If the door locks cycle twice, repeat steps A and B in step 6 as the remote was not accepted. C. Repeat steps A and B in step 6 for each new remote.7. Open drivers door.8. Test all remotes.Procedure #2 (99-02 4Runner, 04-07 Sequoia)1. Start with key out of the ignition, unlock and open drivers door and be sure all other doors and trunk are closed.2. Insert key into ignition (Do not turn) and pull it out.3. Perform these steps within 40 seconds. A. Using the power door lock rocker switch on drivers door perform 5 lock/unlock cycles starting with lock. Use an even pace and try to go about one cycle per second. (1 cycle = 1 lock and 1 unlock.).4. Close, then open drivers door.5. Perform these steps within 40 seconds. A. Using the power door lock rocker switch on drivers door perform 5 lock/unlock cycles starting with lock. Use an even pace and try to go about one cycle per second. (1 cycle = 1 lock and 1 unlock.) B. Insert the key in the ignition cylinder. C. Turn the ignition to ON (Just shy of starting car, Do NOT Start) then back to OFF. D. Turn the ignition to ON (Just shy of starting car, Do NOT Start)) then back to OFF. E. Remove the key from the ignition.6. Within 3 seconds the power door locks should cycle automatically indicating successful entry into programming mode. Return to step 1 if the locks do not cycle at this point, if they do cycle then continue to step 7.7. Perform these steps within 40 seconds. A. Press the lock and unlock buttons on the remote simultaneously for 1 second. B. Immediately after letting go of the lock and unlock buttons, Press the lock button by itself and hold for 2 seconds. Within 3 seconds the door locks should cycle once indicating successful programming. If the door locks don't cycle or cycle twice, repeat steps A and B, your remote has not been accepted. C. Repeat steps A and B in step 7 for each new transmitter.8. Close drivers door.9. Test all remotes. If you are still not sure if it is suitable for your car, you can contact me as soon as possible, I will answer your questions. Please enter the store browse more preferential goods! THANK YOU

Price: 12.51 USD

Location: Walnut, California

End Time: 2025-01-20T00:51:14.000Z

Shipping Cost: 0 USD