For precision parts of milling machine, 90-angle adjustable for AP25 measurement

Description: eBay Name: Adjustable Angle Gauge/Adjustable Angle Pad Uses: On Milling Machine, Facing Machine, Grinding Machine and Drilling Machine, Use Adjustable Angle Gauge to Set the Knife Loose Thread Cooperate with Other Fixtures to Clamp the Workpiece and Process the Workpiece, Such as Processing Inclined Plane, drilling Oblique Holes, Etc. Usage: (1) Loosen the Screw and Pull the V-Block to Rotate along the Guide Rail on the Base to Find the Target Angle. (2) Use the Cursor Principle to Read, the Degree on the Main Scale Is 1 °, and the Cursor Degree Is 10 '. After the "0" Line on the Cursor Is Aligned with the "0" Line on the Main Scale, It Means That the Measuring Surface A Is Parallel to the Datum Line, and the Datum Line B Is Perpendicular to the Datum Line. ① When the Cursor "0" Line Is to the Right of the Main Scale "0" Line, the Degree Is Read out with the Cursor "0" Line, the Scores Are Read out with the Scale to the Right of the Cursor "0" Line (the Reading Method Is the Same as That of the Vernier Caliper). The Degrees (°) and Scores (') Read out Indicate the Anticlockwise Rotation Angle of the Measuring Surfaces a and B. ② When the Cursor "0" Line Is on the Left of the Main Scale "0" Line, the Degree Is Still Read out with the Cursor "0" Line, and the Score Is Read out with the Scale on the Left of the Cursor "0" Line. The Degree of Reading (°) and Minute (') Indicate a, B the Angle of Clockwise Rotation of the Measuring Surface. ③ Tighten the V-Block to Set Screw with the Base after the Angle Is Adjusted to the Target Value. Main Technical Indicators: (I) Measuring the Surface a and the Fundamental Plane Parallel to the Measurement Surface B Datum Line Perpendicular to Each Other, the Cursor "" 0 "" Line of the Main Scale '0' Line Not Degree Greater than 3 ′, the Cursor across the Point Scale and the Main Scale Two 11 ° Line of Heavy Degree Is Not Greater than 5 '; on the Contrary, Tighten the Screw of the Main Scale 0 ° Line Cursor "" 0 "" Line after Alignment, A the Parallelism between the Measuring Surface and the Datum Line Is Not More than 0.01, B the Verticality between the Measuring Surface and the Datum Line Is Not More than 0.01mm (Z) in a Fixed State, the Adjustable Angle of the Basic Error of Not More than ± 10 ′

Price: 91.49 USD

Location: CN

End Time: 2024-08-23T01:41:05.000Z

Shipping Cost: 0 USD