Citronic

For 2006-2008 Lexus IS250 IS350 Front Body Bumper PU Lip Splitter Kit Spoiler

Description: Specifics and Features: Long Lasting and Shock Resistance; Improve Aerodynamic and Dress-up Exterior Unfinished Unpainted Raw Black Polyurethane Light weight and durable material FSP StylePre-drilled mounting screw holes Great add-on to bring a different appearance to vehicle that great for show use Material: Polyurethane Includes: 1 x Front Bumper PU LipMounting Hardware Adhesive tape / Adhesion promoter Notes: Installation guide is not included; Professional installation is strongly recommendedThese are unfinished polyurethane; Some Scuff or scratch can be expected; Sand / Primer is optional but recommendedMounting hardware included may vary from photo shown ALWAYS PRE-FIT the part before paint / drilled / cut / sanded!!!!! NO return or refund for the parts fall off on the road due to installation error NO RETURN / EXHANGE IF THE PRODUCT IS PAINTED OR MODIFIED (DRILL / CUT / SANDED) Compatible with: 2006-2008 Lexus IS250 / IS350 ONLY INSTALLATION PREP GUIDE: Package included: 1. Polyurethane lip 2. Install hardware are sealed at the end of the plastic packaging (hardware included may vary from product image and provided only when its applicable) Material and Tools needed: (NOT included) 1. Sockets / wrenches / screwdriver 2. Drill bits set 3. Sandpaper 4. Soap / acetone 5. 3M industrial double side tape with adhesion promoter (using cheap tape may not stick properly) PRE-FIT on the vehicle prior any paint / drill / cut / sand / installation! 1. Use masking tape on the places where the aero lip kit may be touching the vehicle body to prevent scratches during the pre-fit 2. Sanding / filing / spacing are required if you are going to paint the lip for a proper clean tight fit 3. Doing the above Pre-fit steps will make sure you have a proper fitment IF LIP ARRIVED WARPED / DISPORTED: 1. Polyurethane is flexible and bendable and it can reform to its original shape by heat 2. Lay the lip inside the plastic packaging bag on a flat surface outside under the sun heat for several hours 3. Use a heat gun for faster result by gently heat up the distorted area and bend the lip to the correct shape by hand, it will stay in this correct shape when it cools down 4. repeat above steps if necessary INSTALLATION REFFERENCE GUIDE: 1. Apply 3M double side tape 3M double side tape should be applied on the indentation of the bumper lip's inside edge In order for the tape to properly adhere, the surface must be clean and dry (Residual-free cleaner is recommended); Both vehicle and lip must be prepped and cleaned for proper adhesion After cleaning, apply adhesion promoter to 3M double-sided tape; Make sure 3M tape is smooth and wrinkle free when applying the tape (use multiple small piece tape rather than 1 long piece for best result) After applying tape, pull back approximately 1 inch of the protective covering from the tape on each end and make sure the flim is sticking out 2. Place bumper lip on the vehicle GENTLY place the lip on the vehicle and make sure everything is position correctly While holding on position, pull the tabs created while lightly applying pressure downward. Make sure not apply too much force when tearing off the tabs After all the flims are removed; apply force and press all the tapes and make sure the tape has bonded properly If there are gaps between the lip and vehicle, use the heat gun method to make it sit flush properly 2. Secure the lip Use screws to secure both end of the lip (screws are for reinforcement only) Use screws to secure the bottom of the lip (be sure to drill pilots holes first) NO RETURN / EXHANGE IF THE PRODUCT IS PAINTED OR MODIFIED (DRILL / CUT / SANDED)

Price: 78.99 USD

Location: Rowland Heights, California

End Time: 2025-01-09T01:07:44.000Z

Shipping Cost: 0 USD

Product Images

For 2006-2008 Lexus IS250 IS350 Front Body Bumper PU Lip Splitter Kit Spoiler

Item Specifics

Restocking Fee: No

Return shipping will be paid by: Seller

Returns Accepted: Returns Accepted

Item must be returned within: 30 Days

Refund will be given as: Money back or replacement (buyer's choice)

Brand: SR2 MOTOR

Modification Description: Professional Installation Required

Type: Front Bumper Lip

Color: Unpainted Black

Fitment Type: Peformance/Custom

Note: Fit on Factory bumper (NOT included) only

Manufacturer Part Number: PU-IS3506-FS

Material: Polyurethane

Surface Finish: Unfinished Raw Polyurethane

Installation instructions: Not Included

Placement on Vehicle: Front

Recommended

1PC New Pepperl+Fuchs P+F KFD2-SR2-2.2S Safety Barrier Expedited Shipping
1PC New Pepperl+Fuchs P+F KFD2-SR2-2.2S Safety Barrier Expedited Shipping

$195.80

View Details
Gasket for engine seal for Simson SR1 SR2 SR2E KR50
Gasket for engine seal for Simson SR1 SR2 SR2E KR50

$2.08

View Details
Simmer Rings to Engine and Transmission for Simson SR 2E - NBR Shaft Sealing Rings
Simmer Rings to Engine and Transmission for Simson SR 2E - NBR Shaft Sealing Rings

$8.63

View Details
Hobbywing SR2 Extended Cable 300mm Female to Male for EZRUN MAX10 G2 ESC Motor
Hobbywing SR2 Extended Cable 300mm Female to Male for EZRUN MAX10 G2 ESC Motor

$12.99

View Details
New Kobelco SK45SR-2 Final Drive Motor Kobelco SK45SR-2 Travel Motor
New Kobelco SK45SR-2 Final Drive Motor Kobelco SK45SR-2 Travel Motor

$2200.00

View Details
12V STARTER MOTOR FOR LISTER PETTER TRACTOR SR2 TR ST2 ST3 SERIES ENGINES PNS
12V STARTER MOTOR FOR LISTER PETTER TRACTOR SR2 TR ST2 ST3 SERIES ENGINES PNS

$279.05

View Details
Gasket Set Motor Kautasit AF 200 Simson SR1, SR2, KR50, Spatz Gasket Set
Gasket Set Motor Kautasit AF 200 Simson SR1, SR2, KR50, Spatz Gasket Set

$18.57

View Details
HONDA Genuine Gear Set Electric Roof Motor CR-X CRX EG2 EH6 04857-SR2-315 Japan
HONDA Genuine Gear Set Electric Roof Motor CR-X CRX EG2 EH6 04857-SR2-315 Japan

$44.00

View Details
Set of Small Parts for Motor Regeneration (22 Parts) - for Simson SR1, SR2, SR2E, KR
Set of Small Parts for Motor Regeneration (22 Parts) - for Simson SR1, SR2, SR2E, KR

$6.58

View Details
Raynor RGJH211 SR2 Commercial Overhead Garage Door Opener Motor 1/2 HP 115V
Raynor RGJH211 SR2 Commercial Overhead Garage Door Opener Motor 1/2 HP 115V

$499.99

View Details