Description: Lathe carriage indicator stop holder for the Grizzly 1031 13x40 lathe. Condition is New. Shipped with USPS Priority Fits:Grizzly 1031 13"x40 Lathe DOES NOT NOT NOT INCLUDE THE DIAL INDICATOR!!!!DOES NOT NOT NOT INCLUDE THE DIAL INDICATOR!!!!DOES NOT NOT NOT INCLUDE THE DIAL INDICATOR!!!! This is a 3d-printed "indicator stop" which was developed and tested on a Grizzly 13" lathe. This is a high quality 3dPLASTIC part which is BETTER AS PLASTIC than metal stops because it does the job and WILL NOT DAMAGE YOUR LATHE WAYS!It cannot scratch the way and IF accidentally OVERRAN it will simply slide on the way WITHOUT DAMAGE! The below video is a demonstration on a South Bend 10K lathe showing the use of a simple carriage stop with a dial indicator. This allows setting so that as the carriage reaches a particular location, the operator can witness the position using the dial indicator and disengage or stop the carriage.It is best to set a position of the stop so that when the carriage reaches the dial indicator probe, the advancement to final position is approximately 1 dial turn or less. This makes it easy to "know" when you are about to see the correct "0" point to stop the carriage feeding.It was very easy to stop within 0.005 - 0.010" of a position.This allows you to "manually" advance the carriage to finish the cut if desired.This indicator works very good.Also, you can set tension on the indicator/stop clamp so if an overrun occurs the indicator stop will simply slide. I'm fairly inexperienced at lathe operation but I made this to help me turn a backing plate for a new chuck.It was fantastic and easy to repeat many cuts and STOP within a few thousands of an inch from a preset location.This is great for internal boring and thread cutting! NOTE: This does NOT automatically stop your carriage. The operator MUST manually stop or disengage the carriage feed when desires. The "dial indicator" (NOT SUPPLIED) provides a precise position for carriage stop. Dial indicator bore hole is 0.375 and IF needed a set screw can be used to secure it.MY dial indicator was a SNUG slip fit so I did NOT need to use a set screw to retain the indicators position IN the body of the stop.Images in this listing SHOW the dial indicator probe set screw as you will receive it. Video click below image...(EXAMPLE shown is on a South Bend lathe but works on your Grizzly 1031 13")! IMPORTANT: IF YOU HAVE A SOUTH BEND LATHE SEE MY OTHER LISTINGS!! (NOTE: Holder in video does NOT have dial indicator retaining screw installed, see images with retaining screw.) Lathe carriage stop Indicator - YouTube Video will open in a new window Using the eBay App? Paste link into a browser window:[isdntekvideo]
Price: 34.95 USD
Location: Cross Plains, Tennessee
End Time: 2024-10-18T13:23:09.000Z
Shipping Cost: 4.5 USD
Product Images
Item Specifics
Restocking Fee: No
Return shipping will be paid by: Buyer
All returns accepted: Returns Accepted
Item must be returned within: 14 Days
Refund will be given as: Money Back
Brand: KD-CustomPrints
Control: Manual
Treated Material: Plastic
Machine Type: Metal Lathe
Swing Over Bed: 13 in
