Dynaudio Emit 20 Bookshelf Speakers Walnut Pair

Description: Dynaudio Emit 20 Bookshelf Speakers Walnut PairMid/Bass Power and ControlEmit 20 uses an 18cm MSP (Magnesium Silicate Polymer) woofer, based on the one we’ve used in the Evoke series. MSP is a material we developed in-house, and have used for many years on our most renowned models. The cone itself is a one-piece design; the dust-cap is molded as part of the playing surface, which gives it a solid connection to the voice-coil that moves it back and forth. You’ll hear that connection as supreme control and detail in the low and midrange frequencies. The voice-coil itself is aluminum, wound onto a two-layer glass-fibre former. We’ve a long history of using aluminum wire in our voice-coils – and for good reason. It’s light, so doesn’t impede fine movement, and we can get more windings on the former for a given length of wire. That means more ‘BL’, or magnetic power. More power means more punch. We’ve boosted that further, too, by coating the aluminum wire in copper. Combined with the stacked ferrite magnet system and new surround, that gives Emit 20’s long-throw mid/bass driver all the bass power you could want, even at high volumes, combined with amazing control over midrange frequencies (where instruments such as guitars, vocals and violins reside).High-Level Tweeter PerformanceEmit 20 uses the Cerotar tweeter directly from Evoke. It’s a 28mm soft-dome design that includes the ingenious Hexis inner-dome device. The coated fabric dome delivers sweet-sounding high frequencies – all the openness and detail the artists want you to experience in their recordings – while the Hexis smooths the frequency response and reduces unwanted resonance for surprising clarity. Cerotar is powered by a powerful Ferrite+ strontium carbonate ceramic magnet system. It gives the tweeter all the power it needs to play loud without breakup while maintaining all the nuance you could want. Even at neighbor-bothering levels. And because it uses technology from our top-of-the-range Core pro reference speakers (whose users need to listen intently for long periods), you won’t get tired when you’re in the middle of a long session.Inside the CrossoverThe mid/bass driver and tweeter are marshalled by a custom-designed crossover from the same team who brought you Heritage Special and Core. Our engineers used a hybrid first- and second-order topology for the tweeter and woofer respectively, giving them exceptional control over each driver’s behavior. It means you’ll hear what the artist wants you to hear, without compromise.An Impressive FinishEmit 20 comes in three custom-designed laminate finishes – Black, White and Walnut – that beautifully complement the cabinets’ clean Scandinavian design (conceived in-house at our headquarters in Denmark). Black magnetic grilles come as standard in the box. We’ve even lavished attention on the cover-rings, which hide the mounting screws. They’re one-piece molded with the surface finish embedded in the material, which eliminates the need for lacquer – so they won’t degrade over time. If you want an audiophile-level standmount speaker for a stereo set-up in medium-size room, or fancy a little more ‘oomph’ from your rear surround channels, Emit 20 is the ideal choice.Features: Designed and engineered in Denmark Cerotar tweeter Clean and simple designed to fit in with modern lifestyles Specs: Sensitivity: 85db (2.83V/1m) IEC Power Handling: 160W Impedance: 6 Ω Frequency Response (± 3 dB): 53Hz - 25kHz (-6 dB 42 Hz - 35 Khz) Box Principle: Bass reflex rear double flared port Crossover: 2-way Crossover Frequency: 3800Hz Crossover Topology: 1st order tweeter / 2nd order woofer Midrange / Woofer: 18cm MSP Tweeter: Cerotar soft dome with Hexis Weight: 28 lb Dimensions (W x H x D): 8.1" x 14.6" x 12.3" Dimensions with feet/grill (W x H x D): 8.1" x 14.6" x 12.8"

Price: 1049 USD

Location: Grand Rapids, Michigan

End Time: 2024-01-07T20:27:40.000Z

Shipping Cost: 0 USD