Digital Automobile Gauge for EGT, Boost, White LED

Description: Model#: SYL-1813W Digital Automobile Multimeter for EGT, Boost and More...White LED Display This digital automobile gauge can be used to measure temperature, pressure and other important parameters such as battery voltage, current and air/fuel ratio. Its bright LED display is easy to read from a distance as compared with many dim LCD type digital gauges. The programmable alarm will turn on a LED in the front panel to get driver's attention if the temperature/pressure is above the setting point. It will also close a relay output port that can be used to turn on a buzzer, shut off the fuel, or turn on a cooling fan. The meter stores the peak temperature/pressure with time that can be checked later. It can also operate in the peak holding mode so that only the maximum value is displayed. The brightness of LED display can be synchronized with headlight. When the headlight is turned on in the night, the display will be dimmed by the illumination signal. It can also be dimmed directly from the key pad. Developed based on industrial grade instruments, this four digits gauge offers up to 10 times the resolution and accuracy than the most of 3 digits gauges on the market. Its compact size (24 x 48 mm or 1x2") takes less space than a 52 mm round gauge. For EGT measurement, the meter will work with all EGT sensors on the market, grounded or ungrounded. There is no input impendence matching requirement. It can display the temperature in either Celsius or Fahrenheit. It is probably one of the most accurate exhaust gas temperature (EGT) monitor on the market. For boost pressure measurement, the meter will work with all MAP sensors as long as its pressure/output voltage relationship is known. It can display the pressure in either Bar, PSI, or user defined units with high resolution. However, it will not display the pressure with two different type of units in one scale such as PSI for pressure range but inHg for vacuum range. For water/oil temperature measurement, the meter can display from -199 C to 250 C (or -199F to 500F) with 1 degree accuracy when used with our RTD sensor. It will also work with our liquid tight thermocouple based sensor, In addition, it can work with VDO 150C (300F) sensor with a limited display range (50-150C /120-300F). For water/oil pressure measurement, the meter can work with either old style resistive pressure sensor or the modern style pressure transducer with linear voltage output. The meter offers a regulated 5V DC output for the power supply of the pressure transducer. For air/fuel ratio measurement, it can be used to display either air/fuel ratio or lambda when interfaced with Innovate Motorsports' LC-1 wideband oxygen sensor controller. Please note, the meter cannot work as a stand along AFR with the oxygen sensor unless you are using a controller. Specifications Input type Temperature Sensor, K, E, S, R, J, T, B, WRe3-WRe25, Pt100, Cu50, Pressure transducer, 0-375ohm, 0-5V, 0-75mV, Other transducer: 0-30 mV, 1-5V, 0-10V, 0-10mA, 0-20 mA, 4-20 mA. Display One lines, Four digits. °F or °C, Bar, PSI, or user defined Display resolution 1°C, 1°F, or 0.1°C, 0. 1°F, with Pt100 Display brightness control 12 V illumination control signal, or key pad Accuracy ±0.2% or ±1 unit of full input range Control mode On-Off Control output Relay contact: 3A at 240VAC Alarm Relay (3 A rating) high/low alarm, Recording function Maximum, Max time, Minimum, Min time. Recording time 100 hrs with 1 minute resolution. Power consumption <2 Watt Power supply voltage rating 12 (8.5-16.5) VDC Panel cutout dimension 22 x 45 mm Dimension 24 x 48 x 75 mm (1/32 DIN) Click here for instruction manual (for gauges with SN earlier than 201606, click here for manual)Click here for EGT sensor installation guide Click here to download Pressure Sensor Application Guide Click here for water/oil temperature sensor application guide Click here to download Voltage Measurement Application Guide Click here to download Current Measurement Application Guide Click here to download Guide for Boost Gauge Installation Click here for engine fuel/oil pressure sensor installation guide Click here for LC-1 Wideband Oxygen Sensor set up Please contact us if you have any questions. *Warranty: 6 month warranty is offered to protect our buyers from defective parts only. We are not liable for any damages caused due to improper use or abuse. Note: The gauge can only work with one sensor at a time. You may use an external mechanical switch to make it work with multiple sensors of the same type. It is not practical to switch two different types of sensor while you are driving because you need about 10 seconds to change input settings of the gauge. Attention for international buyers. The shipping service provided by this listing is via USPS First Class air mail. The tracking number may not work for the country you live. For most countries, the tracking number will stop working once the package let USPS international mail sorting center in Miami or New York. The shipping time: For West and North Europe, Australia, New Zealand, Canada (except central region) 2-3 weeks. (It might be as short as one week when lucky, but that is not the general case). For South Europe, Russia, Asia: Central region of Canada: 3-4 weeks. For Middle East, Central and South America 5-6 weeks. If you need faster shipping service such as Fedex express mail or EMS, please contact us before you place the order. While carrier transit time and customs clearance time are beyond our control, please email us if your item is not delivered after the estimated delivery time stated above. Customer satisfaction is our focus and we will try our best to trace the package and offer solutions.

Price: 76.49 USD

Location: Alpharetta, Georgia

End Time: 2024-08-25T19:43:39.000Z

Shipping Cost: N/A USD