Digilent Cmod S7: Breadboardable Spartan-7 FPGA Module

Description: The Digilent Cmod S7 is a small, 48-pin DIP form factor board populated with 36 pins and built around a Xilinx Spartan-7 FPGA. The 32 FPGA digital I/O signals, 2 FPGA analog input signals, an external power input rail, and ground are routed to 100-mil-spaced through-hole pins, making the Cmod S7 well-suited for use with solderless breadboards. At just 0.7” by 3.05” inches, it can be loaded in a standard socket and used in embedded systems. The board also includes a programming ROM, clock source, USB programming and data transfer circuit, power supplies, LEDs, and buttons. Features: Xilinx Spartan-7 FPGA (XC7S25-1CSGA225C) 3,650 slices containing four 6-input LUTs and 8 flip-flops 1,620 Kbits of fast block RAM Three clock management tile, each with a phase-locked loop and mixed-mode clock manager 80 DSP slices Internal clock speeds exceeding 450 MHz On-chip analog-to-digital converter (XADC) Programmable over JTAG and Quad-SPI Flash Memory 4 MB Quad-SPI Flash Power Powered from USB or 5V external supply connected to DIP pin 24 (micro USB cable NOT included) USB USB-JTAG programming circuitry USB-UART bridge Push-buttons and LEDs 2 Buttons 4 LEDs 1 RGB LED Expansion Connectors 1 Pmod connector 8 total FPGA I/O 48-pin DIP form-factor headers 36 populated pins 32 total FPGA I/O 2 Single-ended 0-3.3V analog inputs to XADC Box Includes Cmod S7 Digilent cardboard packaging with protective foam inserts Reference Manual Cmod S7 Reference Manual

Price: 129.99 USD

Location: Rahway, New Jersey

End Time: 2024-11-01T14:09:40.000Z

Shipping Cost: 0 USD