1960 Time Machine 1/6 Scale Model Custom Kit Parts: Lt Cages, Bulbs, Etc.

Description: NOTE: This is NOT the Time Machine Model - they are additional parts to enhance your model and make construction a bit easier. These are custom 3D printed light cages for the 1/6 scale Model of H.G. Well's Time Machine from the 1960 George Pal motion picture. If you struggle to shape the brass wire and solder it together to create the light cages (it's almost impossible unless you're a jeweler), three for the red/green/yellow indicator bulbs on the control console and the single large one for the bulb on top of the time generator, you need this set. The indicator cages fit small LED bulbs and the larger cage is in two parts, upper and lower, to allow the bulb to be inserted (see the photo of the assembled large cage). Bases are provided for each cage. Note: the cages must be carefully cut from the bottom disc with a sprue cutter or fine wire cutter. ACC glue assembly is recommended. Also in this set are some parts that I bought in large quantities on the internet and only a few are required for the model so I'm offering them in this set. Two jewelry box hinges and eight screws to fit to the arms of the Time Traveler's saddle. (The bottom rear of the arms should be carefully carved out to accept the hinges.) Three small 5mm LED bulbs - red, yellow and green. (I did not electrify my model because it's just a display model, so I cut the leads off the bottom of my bulbs.) One small aluminum hub to mount the large dish to the driveshaft (Driveshaft is NOT included.) NOTE: Shipping may take a few extra days if the 3D printed parts are newly printed and require cleaning and curing. If you have questions about the build or the parts I'll do my best to answer. I will inform you as to when I can ship the parts if you inquire before purchasing,

Price: 25 USD

Location: Melbourne, Florida

End Time: 2024-10-03T23:38:04.000Z

Shipping Cost: N/A USD