Collins 51S-1 Cabinet Reproduction with Trim Ring, Feet, Risers. & SS Hardware

Description: This Collins 51S-1 Cabinet Reproduction with Trim Ring, Feet, Risers. & SS Hardware, will work with all Versions of the 51S-1. The cut out on the rear panel was made so that all models of the 51S-1 will fit. This beautiful reproduction has the original baked on enamel finish that matches the original made by Collins. We had this product made by a USA company in the aero space industry, that manufactures parts for the aircraft industry. A state of the art computerized Coordinate Measuring Machine (CMM) was used to configure the cabinet so that the construction of this cabinet will look and fit just like the original. This cabinet is made with Aluminum like the originals, but is made with 6061 T6 aluminum, which is not as soft as the original Collins cabinets which will bend, dent and distort very easy if you are not careful. This reproduction will not bend as easy as the originals as it is much stronger. The Paint we used on this reproduction, is baked on enamel paint on both the cabinet and the Aluminum trim ring. It is matched to the original Collins paint formula, with the same finish so it will match your Collins S-Line gear. The aero space Company that does the paint on this item as well as all painted S-Line items we sell, is one of the companies that paint aluminum aircraft so they know how to properly prepare the surface, and paint Aluminum products! It has an Aluminum Trim Ring, and aluminum Risers. Please note that while the 51S-1 Aftermarket cabinet is of the highest quality and matches the original, there are a few points to mention. NOTE: The fit and finish is very close with baked on enamel paint. The trim rings are also nearly an exact reproduction however the fit is very tight for the face plate to clear the trim ring. The face plate will fit but may cause some light scratches when installed. This is because while the paint thickness was accounted for in the final production, the primer and blocking were not so it is a tight fit and takes some effort to install. One fix to this problem, is cutting the plate on the bottom through to allow the trim ring to expand. When the front feet and risers are installed, it will hold the bottom seam together and you do not notice it has been cut. All 51S-1 Cabinets will be shipped with the trim ring cut to allow easier installation unless otherwise requested ! The other thing to point out is the manufacturer of this cabinet, used an early style cabinet to copy. The early style 51S-1 Cabinets had the finger hole more forward on the top rather than back a few inches so your finger does not run into the lamp assemble hood underneath. The rear panel is designed to fit with all versions of the 51S-1 I have only a limited number of these cabinets available! The the inside trim ring counter sunk screws are also included. I am selling them as is as described. I do not have many left so this is really the only available option for a 51S-1 Cabinet that looks original. If you do purchase an ebay item from me and for some reason are not satisfied or have questions, PLEASE contact me right away and I will take care of it to your satisfaction, (rather than leaving negative or neutral feedback before I am made aware of a problem). I sell hundreds of pieces of used and new gear and it is possible I could miss something or make an occasional mistake, but I will always work to make sure you will be satisfied or I will refund your full payment including the shipping cost, so there is no risk you will be stuck with something that you do not want. I know there are many sellers that do not much care about your satisfaction but I am not one of them! Please consider this before you bid on my items and before leaving any negative or neutral feedback.

Price: 249.99 USD

Location: Suamico, Wisconsin

End Time: 2024-12-14T22:43:17.000Z

Shipping Cost: 30 USD