CLASSIC SILVER 1 3/8" x 100' Colored Half-Round Body Side Molding

Description: This is a Color Trim 1 3/8” Half Round Body Side Molding in the color CLASSIC SILVER.The Molding that you are purchasing is a 100 Ft. Roll. However it does also come in 24' and 50'. If you wish to purchase a smaller roll, we can help you with that.This molding is offered in many colors, and we can match it directly to the color of your car. Just message us with the paint code and we will find the best match for youThis Half Round Body Side Molding can be used in vehicles, furniture, spas, tubs and almost any unfinished edge. It comes with a 3M Acrylic Foam Tape for easy, quick installation. *IF you are looking for any other size, style, or color molding (or if the color you want is not listed), message us and we will point you to the correct product.* Follow the instructions on the package for proper installation. If any there are any questions still do not hesitate to ask us. Application Procedures The body of the vehicle must be clean and dry to achieve the best adhesion. Clean with 70% Isopropyl Alcohol. If the vehicle has not been thoroughly cleaned with alcohol in the spot of installation, the molding will not stick. The pressure sensitive adhesive on the molding must not be contaminated during the application. The molding must be applied to achieve complete contact (bond) of the adhesive to the vehicle. (i.e. maximum wet-out) Molding adhesion is best when applied at temperatures above 80 degrees Fahrenheit to 110 degrees Fahrenheit. During cold weather, warm molding with a heat gun or heat lamp. Be careful not to damage the surface. Cut molding with an anvil type cutter to proper length. Allow 24 hours for molding to set.

Price: 173.95 USD

Location: Glen Allen, Virginia

End Time: 2025-01-29T13:20:37.000Z

Shipping Cost: 0 USD