Brand New Authentic Ultratech UT1240 Battery, Honeywell, GE, DSC, Date: 2023

Description: Brand New Ultratech UT1240 Alarm Back-up Battery, 12V, 4.5Ah , Honeywell, GE, DSC, This 12 Volt, 4 Ah (Amp Hour) Sealed Lead Acid Alarm Battery is one of the most popular alarm system backup batteries available today. Residential Alarm panels made by Honeywell Ademco, Napco, DSC and GE are very common applications for the Ultratech UT1240 battery. The UT1240 is commonly referred to as the UltraTech UT-1240 as well as the UltraTech IM-1240 however they are one and the same and synonymous with quality and reliability. Ultratech Power Products UT 1240 12V 4.5Ah Sealed Lead Acid Alarm Battery Which alarm batteries do technicians, installers, and security professionals choose for their 12 Volt 4.5 Amp Hour SLA Backup Alarm Batteries? UltraTech Power Products UT 1240, time and time again. UltraTech Power Products is known to be the most reputable Alarm Battery brand in the country. When choosing a 12 Volt 4.5 Amp Hour SLA battery, the UltraTech UT 1240 is the ideal backup power source. Here are a few reasons the UT 1240 (commonly known as the IM-1240) is recognized as the best in the industry: • 2 Year Manufacturer’s Warranty – (Covers Defect Only, not Lifespan) • Highest quality parts in the industry: ISO 9002 Certified • Easy Installation • Rechargeable • Non-Spillable: Can be operated in any position without leakage This battery is the direct replacement for all previous versions of UltraTech UT1240. While previous models of the Ut1240 may be 12V 4Ah batteries, be assured that the UT 1240 12V 4.5 Ah battery is the newer, current model and is fully compatible. Ultratech batteries are often found in burglar alarm systems, fire alarm systems, access control systems, low-voltage lighting, uninterruptible power supplies (UPS) systems, as well as other security and battery backup applications. Residential Alarm panels made by Honeywell Ademco, Napco, DSC and GE are common applications of the Ultratech UT 1240. Terminals: Fast-on F1 (0.187”) Connectors Click Here for the UT 1240 Spec Sheet Battery Specifications: 20Hr. rate of 0.225A to 10.5V 4.5Ah 10Hr. rate of 0.400A to 10.5V 4.0Ah 5Hr. rate of 0.720A to 10.5V 3.6Ah 1Hr. rate of 2.700A to 9.60V 2.57Ah Weight (approx.): 3.63 pounds (1.65kgs.) Energy Density (20Hr. rate)- 1.38WH/ cubic inch (84.38WH/ liter) Maximum Discharge Current with Standard Terminals- 22.5A Amperes UltraTech Alarm Battery Installation Guide Most alarm panels traditionally give indication of a low battery on the keypad. After ordering a replacement UltraTech battery, here's how to replace the battery in your alarm panel with the new UltraTech replacement battery. 1) Remove the existing battery, by disconnecting the two (typically red and black) leads attached to the metal contacts on the battery 2) Attach the new replacement UltraTech Alarm Battery, matching the red and black lead wires to the same metal terminals taking note to connect the red lead to the metal terminal with plastic underneath it and the black to black 3) Wait one to five hours, as it may take up to five hours for the low battery indicator to disappear from your connected keypad After following the above steps, your UltraTech Alarm Battery should be completely operational and functional and able to provide battery backup power in case your alarm system is involved in another blackout, brownout or any other inconsistent power situations. Your original UltraTech Alarm Battery that you have now replaced, is fully recyclable and in most states it is illegal to dispose of it any other way. They are typically recycled at full service auto mechanics, but check the local waste management officials in your area for exact disposal procedures.

Price: 27.99 USD

Location: Los Angeles, California

End Time: 2024-08-27T22:26:21.000Z

Shipping Cost: 0 USD