BMR Suspension SP034 64-72 A-Body Lowering Springs Front 2" Drop

Description: BMR Suspension eBay Store 1964 - 1972 A-Body SP034 - Lowering Springs, Front, 2" Drop BMR Suspension components are proudly hand Made In USA by American workers in our manufacturing facility near Tampa, Florida. We cut, bend, notch, drill, weld, mill, powder coat and package all our high quality performance components from American-made DOM and Chrome-Molly steel. Part Number SP034 There is nothing like the aggressive look of a car with the right stance! Over time, stock springs sag, get rusty, and simply wear out. BMR Suspension believes the right springs go beyond looks—your GM A-body needs to perform, too! All BMR springs are manufactured from chrome silicon high-tensile spring wire, and are cold wound on a CNC coiling machine. The CNC coiling head can adjust the spring diameter in real time to ensure that every spring is exactly the same. This guarantees that your right spring matches your left spring. Every BMR spring is compressed solid at the factory, not once, but twice. This gives the spring its permanent set, and guarantees no sag. BMR springs are stress-relieved at 750 degrees F, ensuring most stresses induced during the winding process are eliminated. All springs are then shot-peened to eliminate residual surface stresses. Many spring manufacturers skip this step, but BMR insists on this operation as part of our spring manufacturing process. Every spring is computer tested as the last step—every spring, not just a sample from each batch. Each spring is loaded in the spring tester at the factory, then compressed and the CNC load cell measures the force for a variety of spring lengths. This allows BMR to offer a LIFETIME WARRANTY against spring sag. Blending aesthetics and performance, BMR has designed the SP034 for the street performance crowd who want to use their cars in a variety of application. These springs will drop the front end of your 1964-1972 GM A-body 2-inch, and feature a fine-tuned spring rate to give you great handling and a smooth ride. The spring rate offers plenty of support, keeping the body flat and level in the corners, while remaining soft enough for a comfortable ride on any road. When performance and looks are a must, rely on BMR Suspension! BMR Suspension’s SP034 lowering springs are available in red powdercoat for long-lasting good looks. Installation time is about 2-3 hours. Proudly made in the U.S.A. - Lowers the front of your 1964-1972 GM A-body 2-inch - Improves handling and ride quality - Manufactured from chrome silicon high-tensile spring wire - Cold wound on a CNC Coiling Machine to exact specifications - Lifetime warranty against spring sag - Stress-relieved at 750 degrees F - Shot-peened - Computer tested for accurate height and spring rate - Made in the U.S.A. Application(s) 1964 - 1972 Buick Grand Sport 1964 - 1972 Buick Skylark 1964 - 1972 Chevy El Camino 1964 - 1972 Chevy Chevelle 1964 - 1972 Chevy Malibu 1964 - 1972 Chevy Monte Carlo 1964 - 1972 Oldsmobile Cutlass 1964 - 1972 Oldsmobile 442 1964 - 1972 Pontiac LeMans 1964 - 1972 Pontiac GTO Please see the "Compatibility" link at the top of the listing. For any questions about the fitment of this product on your vehicle, please click the "Ask Seller a Question" link and we will respond promptly. Manufactured By BMR Suspension Inc. - Proudly Made in USA By American Workers! Available Colors Red Contact Us Sales & Tech Support 813-986-9302 Main Fax 813-986-8055 Email Please use the "Ask Seller a Question" link for all emails. Address BMR Suspension, Inc. 928 Sligh Ave. Seffner, FL 33584 Shipping Please click the "Shipping and Payment" tab or the top of the listing for shipping costs and methods. We usually ship within 1-5 business days upon received payment, provided that you have supplied your color preference and the item is currently in stock. Shipping cost includes UPS insurance to cover the FULL VALUE of the product(s). Shipping methods for all items shipping in the US 48 states are shipped via UPS. Hawaii and Alaska residents may e-mail us for a shipping quote and we will respond promptly. Canada & International Shipping We will gladly ship all items World Wide, buyer is responsible for ALL shipping cost and duties, understand there may be taxes or duties to enter your country. All international items will ship UPS with no exceptions. Item(s) will be insured for the full amount of the package and shipping and will not be marked as a “Gift”. Please e-mail us a shipping address and we will reply with shipping quotes ASAP. Payment Please wait until we send you an invoice before you pay! Florida buyers pay 7% sales tax on item and shipping price. You may contact us by e-mail or by calling (813) 986-9302 with any questions you may have. Phone orders are welcome, as well as our secure website with our full line of BMR products. We accept the following forms of payment Paypal Visa MasterCard Amex Discover About BMR Suspension Inc. When BMR Suspension began back in 1998, it was difficult for performance automotive enthusiasts to find suspension products that had an innovative design and quality construction at an affordable price. BMR turned this market void into a business philosophy, and has been serving our customer's needs ever since. Currently offering chassis, suspension, and drivetrain products for 22 different vehicles, BMR is the leading suspension manufacturer in many of the market segments that it serves. Whether you are interested in street performance, hardcore drag racing, or handling applications, BMR Suspension has the products that you need. Proudly made in the U.S.A. in a manufacturing facility near Tampa, Florida, American workers cut, bend, notch, drill, and mill components from American-made DOM and chrome-moly steel. Then, every product is fixture-welded to maintain consistent quality. Workers bead-blast parts and then powdercoat them using BMR's in-house powdercoating line. Finished parts are then assembled and packaged in the assembly department. By manufacturing every product in house, BMR can control the quality at every stage of the manufacturing process. BMR Suspension products fit and work so well because they are street driven and track tested on BMR project vehicles. Past project cars include a 2005 Mustang drag car, a 2005 Mustang street car, a 2004 GTO, and a 1994 Camaro. BMR's current project vehicles include a 2016 Camaro, three 2015 Mustang GTs, a 2011 Mustang GT, a 2010 Camaro, and a 1969 Camaro. As if that were not enough, BMR also has a 2009 G8 GT, a 2008 Trailblazer SS,a 2003 Mach 1 Mustang, a 2000 Grand Prix GTP, a 1998 Camaro, a 1990 Mustang LX, a 1971 Camaro, a 1970 Chevelle, a 1967 Chevelle, and a 1968 GTO. But it is more than just great vehicles-virtually every BMR employee is a racer or hot rodder, as well. This love of racing is demonstrated everyday in BMR's customer service, design innovation, and manufacturing quality. By continuing to push the envelope in product design innovation and manufacturing technology, you can be sure that BMR Suspension will continue to offer the most innovative, quality-oriented, affordable suspension products available. When performance is a must, rely on BMR Suspension! Warranty BMR product applications are warranted to be free from defects in material and workmanship under normal use and service for a period of (2) two years from the date of sale to the original purchaser. Obligation under this warranty is limited to product replacement but not the reinstallation of the replacement product or other incidental costs. This warranty does not cover any product that has been subject to misuse, neglect, alteration, accident, or improper installation. Normal wear shall not be considered a defect under this warranty. All warranty adjustments are limited to replacement or credit of returned merchandise. This warranty specifically excludes impact damage or damage to powdercoat. BMR will issue a Returned Material Authorization number for every return. Returned goods will not be accepted without an RMA Number. BMR will ship the replacement product at no charge using UPS Ground. If the customer would like to upgrade the shipping method (for example, Next Day Air), the customer will be charged the difference in shipping cost. BMR product is designed to be used with OEM product and other BMR products. BMR does not warranty our product for fitment with aftermarket product from other manufacturers. This applies to suspension products from other manufacturers as well as aftermarket exhaust products, aftermarket drivetrain products, and other aftermarket products. BMR products that are returned due to fitment issues with OEM components or BMR product will receive a full refund. BMR products that are returned due to fitment issues with aftermarket product will be subject to a 15% restocking fee. Purchaser understands and recognizes that racing parts, equipment and services by or manufactured and/or sold by BMR, are subject to varied conditions due to the manner in which they are to be installed and used. The acceptability and suitability of any part sold or manufactured by BMR for a particular application is solely the purchaser's decision. BMR makes no warranties whatsoever, expressed or implied, or or written, THERE IS NO WARRANTY OF MERCHANTABILITY. The right to make changes in the design or add to or improve on their product without incurring any obligation to install the same on products previously manufactured is expressly reserved. Buyer agrees to indemnify and hold Seller harmless from any claim, action or demand arising out of or incident to Buyer's installation or use of products purchased from BMR. Returns (Non-Warranty Items) All non-warranty returns must be made within 90 days from the date of shipment and are subject to a 15% restocking fee, excluding all shipping cost. BMR Suspension will not accept returns on items that have been installed, used, modified or damaged. All items must be received in the original packing material and in the original condition as it was shipped. All items damaged from shipping will be refused. BMR will issue a Returned Material Authorization number for every return. Returned goods will not be accepted without an RMA Number. There are no refunds on shipping and handling charges and all items must be sent prepaid. All returned goods sent freight collect will be refused. If item is returned scratched, nicked or damaged in any way, the cost to repair or re-powder coat the item will be deducted from the amount of the refund. If item is missing any components, the cost to replace these components will be deducted from the amount of the refund. Special order items cannot be returned. © 2013 Copyright BMR Suspension Inc. | SP034 | Proudly Made In America!

Price: 139.95 USD

Location: Seffner, Florida

End Time: 2023-09-24T19:24:58.000Z

Shipping Cost: 0 USD