Black Indochinite Tektite Stone 36.1 gram 43x31x22 mm

Description: Black Indochinite Tektite Stone Weight: 36.1 gram Size: 43x31x22 mm Location: Discovered at Maoming, Guangdong Province, China *** Tektite Tektites are gravel-sized bodies composed of black, green, brown, or gray natural glass formed from terrestrial debris ejected during meteorite impacts. They generally range in size from millimeters to centimeters. Millimeter-scale tektites are known as microtektites. Tektites are characterized by: *a fairly homogeneous composition *an extremely low content of water and other volatiles *an abundance of lechatelierite *a general lack of microscopic crystals known as microlites and chemical relation to the local bedrock or local sediments *their distribution within geographically extensive strewn fields Characteristics Although tektites are superficially similar to some terrestrial volcanic glasses (obsidians), they have unusual distinctive physical characteristics that distinguish them from such glasses. First, they are completely glassy and lack any microlites or phenocrysts, unlike terrestrial volcanic glasses. Second, although high in silica (>65 wt%), the bulk chemical and isotopic composition of tektites is closer to those of shales and similar sedimentary rocks and quite different from the bulk chemical and isotopic composition of terrestrial volcanic glasses. Third, tektites contain virtually no water (<0.02 wt%), unlike terrestrial volcanic glasses. Fourth, the flow-banding within tektites often contains particles and bands of lechatelierite, which are not found in terrestrial volcanic glasses. Finally, a few tektites contain partly melted inclusions of shocked and unshocked mineral grains, i.e. quartz, apatite, and zircon, as well as coesite. The difference in water content can be used to distinguish tektites from terrestrial volcanic glasses. When heated to their melting point, terrestrial volcanic glasses turn into a foamy glass because of their content of water and other volatiles. Unlike terrestrial volcanic glass, a tektite produces only a few bubbles at most when heated to its melting point, because of its much lower water and other volatiles content. Classification On the basis of morphology and physical characteristics, tektites have traditionally been divided into four groups. Those found on land have traditionally been subdivided into three groups: (1) splash-form (normal) tektites, (2) aerodynamically shaped tektites, and (3) Muong Nong-type (layered) tektites. Splash-form and aerodynamically shaped tektites are only differentiated on the basis of their appearance and some of their physical characteristics. Splash-form tektites are centimeter-sized tektites that are shaped like spheres, ellipsoids, teardrops, dumbbells, and other forms characteristic of isolated molten bodies. They are regarded as having formed from the solidification of rotating liquids, and not atmospheric ablation. Aerodynamically shaped tektites, which are mainly part of the Australasian strewn field, are splash-form tektites (buttons) which display a secondary ring or flange. The secondary ring or flange is argued as having been produced during the high-speed re-entry and ablation of a solidified splash-form tektite into the atmosphere. Muong Nong tektites are typically larger, greater than 10 cm in size and 24 kg in weight, irregular, and layered tektites. They have a chunky, blocky appearance, exhibit a layered structure with abundant vesicles, and contain mineral inclusions, such as zircon, baddeleyite, chromite, rutile, corundum, cristobalite, and coesite. Microtektites, the fourth group of tektites, are less than 1 mm in size. They exhibit a variety of shapes ranging from spherical to dumbbell, disc, oval, and teardrop. Their colors range from colorless and transparent to yellowish and pale brown. They frequently contain bubbles and lechatelierite inclusions. Microtektites are typically found in deep-sea sediments that are of the same ages as those of the four known strewn fields. Microtektites of the Australasian strewn field have also been found on land within Chinese loess deposits, and in sediment-filled joints and decimeter-sized weathering pits developed within glacially eroded granite outcrops of the Victoria Land Transantarctic Mountains, Antarctica. Occurrence Since 1963, the majority of known tektites have been known to occur only within four geographically extensive strewn fields: the Australasian, Central European, Ivory Coast, and North American. As summarized by Koeberl, the tektites within each strewn field are related to each other with respect to the criteria of petrological, physical, and chemical properties, as well as their age. In addition, three of the four strewn fields have been clearly linked with impact craters using those same criteria. Recognized types of tektites, grouped according to their known strewn fields, their associated craters, and ages are: Australasian strewnfield (no associated crater identified, age: 0.77–0.78 million years): Australites (Australia, dark, mostly black); Indochinites (South East Asia, dark, mostly black); Philippinites (Philippines, black). Central European strewnfield (Nördlinger Ries impact crater (24 km), Germany, age: 15 million years): Moldavites (Czech Republic, green). Ivory Coast strewnfield (Lake Bosumtwi impact crater (10 km), Ghana, age: 1 million years): Ivorites (Ivory Coast, black). North American tektite strewn field (Chesapeake Bay impact crater (40 km), United States – age: 34 million years): Bediasites (Texas – black to dark brown, some with metallic finish); Georgiaites (Georgia – green). Age The ages of tektites from the four strewnfields have been determined using radiometric dating methods. The age of moldavites, a type of tektite found in the Czech Republic, was determined to be 14 million years, which agrees well with the age determined for the Nördlinger Ries crater (a few hundred kilometers away in Germany) by radiometric dating of Suevite (an impact breccia found at the crater). Similar agreements exist between tektites from the North American strewnfield and the Chesapeake Bay impact crater and between tektites from the Ivory Coast strewnfield and the Lake Bosumtwi Crater. Ages of tektites have usually been determined by either the K-Ar method, fission-track dating, the Ar-Ar technique, or combination of these techniques. Origins The overwhelming consensus of Earth and planetary scientists is that tektites consist of terrestrial debris that was ejected during the formation of an impact crater. During the extreme conditions created by an hypervelocity meteorite impact, near-surface terrestrial sediments and rocks were either melted, vaporized, or some combination of these, and ejected from an impact crater. After ejection from the impact crater, the material formed millimeter- to centimeter-sized bodies of molten material, which as they re-entered the atmosphere, rapidly cooled to form tektites that fell to Earth to create a layer of distal ejecta hundreds or thousands of kilometers away from the impact site. The terrestrial source for tektites is supported by well-documented evidence. The chemical and isotopic composition of tektites indicates that they are derived from the melting of silica-rich crustal and sedimentary rocks, which are not found on the Moon. In addition, some tektites contain relict mineral inclusions (quartz, zircon, rutile, chromite, and monazite) that are characteristic of terrestrial sediments and crustal and sedimentary source rocks. Also, three of the four tektite strewnfields have been linked by their age and chemical and isotopic composition to known impact craters. A number of different geochemical studies of tektites from the Australasian strewnfield concluded that these tektites consist of melted Jurassic sediments or sedimentary rocks that were weathered and deposited about 167 My ago. Their geochemistry suggests that the source of Australasian tektites is a single sedimentary formation with a narrow range of stratigraphic ages close to 170 Mya more or less. This effectively refutes multiple impact hypotheses. Although the formation of and widespread distribution of tektites is widely accepted to require the intense (superheated) melting of near-surface sediments and rocks at the impact site and the following high-velocity ejection of this material from the impact crater, the exact processes involved remain poorly understood. One possible mechanism for the formation of tektites is by the jetting of highly shocked and superheated melt during the initial contact/compression stage of impact crater formation. Alternatively, various mechanisms involving the dispersal of shock-melted material by an expanding vapor plume, which is created by a hypervelocity impact, have been used to explain the formation of tektites. Any mechanism by which tektites are created must explain chemical data that suggest that parent material from which tektites were created came from near-surface rocks and sediments at an impact site. In addition, the scarcity of known strewn fields relative to the number of identified impact craters indicate that very special and rarely met circumstances are required for tektites to be created by a meteorite impact. Payment Payment: By Paypal Shipping cost Free shipping cost. We send the goods to USA, Canada, UK, Australia, New Zealand, EU countries and some other European and Asian countries by E-express, a kind of fast postal service by Hong Kong Post. It usually takes about 6 to 10 working days for delivery. We send the goods to other countries by registered airmail and will take about 8 to 14 working days for delivery. Return policy Returns: We accept returns with any reason in 30 days. Messages We will answer buyer messages within 24 hours during working days. Copy rights of https://stores.ebay.com/Gao-Fu-Collectibles. All right reserved.

Price: 16 USD

Location: Hong Kong

End Time: 2024-11-29T07:34:00.000Z

Shipping Cost: 0 USD